ZK4000-5100-2xxx | Encoder cable, PUR, 5 x 0.25 mm², drag-chain suitable, shielded

M12, plug, straight, male, 5-pin, A‑coded – open end, 5-wire + shielding

Plugs

Electrical data Head A Head B
Rated voltage 60 V (according to IEC 61076-2-101) -
Rated current 7,5 A at 40 °C (according to IEC 61076-2-101) -
Shielding no -
Contact resistance < 10 mΩ -
Insulation resistance ≥ 100 MΩ (according to IEC 60512) -
Mechanical data    
Installation size M12 open end
Connector type plug -
Configuration straight -
Contact type male -
Number of positions (face) 5-pin 5-wire + shielding
Coding A‑coded -
Wire termination screw connection -
Recommended torque, nut 0.6 Nm -
Mating cycles ≥ 100 (according to IEC 60512-9a) -
Way of locking screw -
Weight per piece 0.023 kg (0.0507 lb) -
Body colour black -
Body material PA6 GF, UL 94 HB -
Coupling nut material GD-Zn, Ni -
Seal elastomers -
O-ring FKM/NBR -
Contact carrier colour black -
Contact carrier material PA 6, UL 94 V-0 -
Contact material CuZn, Ni b/Au 0.2 gal. -
Contact plating Au -
Max. wire cross section max. AWG16 / 1.5 mm² -
Max. cable outer diameter 4 - 8 mm -
Environmental data    
RoHS compliant yes -
Ambient temperature, operation -30...+85 °C, -22...+185 °F -
Protection class IP 67 in screwed condition (according to IEC 60529) -
Pollution level 3/2 (according to IEC 60664-1) -

Cable

Electrical data  
Operating voltage ≤ 300 V
Insulation resistance ≥ 1 GΩ * km
Wire resistance ≤ 78 Ω/km (20 °C)
Test voltage ≥ 3000 V
Mechanical data  
Conductor construction 32 x 0.10 mm
Cross section 5 x 0.25 mm²
Min. bending radius, moved 10 x outer cable diameter
Weight 45 kg/km (30.24 lb/1000 ft)
Outer cable diameter 5.65 mm ± 0.2 mm (0.2224" ± 0.0079")
Conductor material Copper bare
Max. acceleration 10 m/s²
Max. speed 3 m/s
Max. number of cycles 2 million
Jacket colour green
Material jacket PUR (polyurethane)
Wire colour code brown, white, blue, black, green
Wire insulation material PP (polypropylene)
Printing colour black
Environmental data  
Operation temperature range, moved -15…+80 °C, +5…+176 °F
Operation temperature range, fixed installation -30…+80 °C, -22…+176 °F
Flame-retardant according to AWM Style 20549 UL 758/1581 FT2
Halogen-free According to IEC 60754 respectively DIN VDE 0472 part 815
Contact assembly  
Dimensions  
A1 61.00 mm
A2 20.00 mm

Notes

- Depending on the cable length (L), the following length tolerances apply:

  0 m…0.2 m: ± 10 mm | 0.2…4.0 m: + 40 mm | ≥ 4.0 m: + 1 %

- Illustrations similar

- Further cable length on request. The last three digits of the ordering information is the cable length in decimeters, e.g.ZKxxxx-xxxx-x020 = cable length 2.00 m

Ordering information Length
ZK4000-5100-2050 5.00 m
ZK4000-5100-2010 1.00 m
ZK4000-5100-2030 3.00 m
ZK4000-5100-2100 10.00 m

Beckhoff®, TwinCAT®, EtherCAT®, EtherCAT P®, Safety over EtherCAT®, TwinSAFE®, XFC® and XTS® are registered trademarks of and licensed by Beckhoff Automation GmbH. Other designations used in this publication may be trademarks whose use by third parties for their own purposes could violate the rights of the owners.

 

© Beckhoff Automation GmbH & Co. KG 08/2017

 

The information provided in this brochure contains merely general descriptions or characteristics of performance which in case of actual application do not always apply as described or which may change as a result of further development of the products. An obligation to provide the respective characteristics shall only exist if expressively agreed in the terms of contract.