1-channel analog input terminal 0…20 mA KL3011
Run LED1
Error LED1
+Input 1
-Input 1
Ground
Shield
Ground
Shield
Top view 
Contact assembly 
extended shock and vibration range

KL3011 | 1-channel analog input terminal 0…20 mA

The KL3011 analog input terminal handles signals in the range from 0 to 20 mA. The current is digitised to a resolution of 12 bits and is transmitted, in an electrically isolated form, to the higher-level automation device. The input channels of the Bus Terminal have differential inputs and possess a common, internal ground potential. The KL3011 is characterised by its fine granularity and electrical isolation. An open lead or overload condition are detected, and the terminal status is relayed to the controller via the K-bus. The run LEDs give an indication of the data exchange with the Bus Coupler. The error LEDs indicate an overload condition and a broken wire.

Technical data KL3011 | KS3011
Number of inputs 1
Power supply via the K-bus
Signal current 0…20 mA
Technology differential input
Internal resistance 80 Ω + 0.7 V
Common-mode voltage UCM 35 V max.
Conversion time ~ 1 ms
Resolution 12 bit
Measuring error < ±0.3 % (relative to full scale value)
Surge voltage resistance 35 V DC
Electrical isolation 500 V (K-bus/signal voltage)
Current consumption power contacts – (no power contacts)
Current consumption K-bus typ. 60 mA
Bit width in the process image input: 1 x 16 bit data (1 x 8 bit control/status optional)
Weight approx. 70 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Pluggable wiring for all KSxxxx Bus Terminals
Approvals CE, UL, Ex, GL