Adapter terminal for manual operating modules KL9309
Signal LED
Infeed 
Top view 
Contact assembly 
Signals
1…16
Infeed + 24 V
0 V
Power
contact
Power
contact
+24 V
0 V
Signals
1…16

KL9309 | Adapter terminal for manual operating modules

The KL9309 adapter terminal has 16 terminal points, which provide the I/Os of the KL85xx manual operating modules. In addition, 24 V DC is fed in via two terminal points (1 x 0 V, 1 x 24 V). The terminal can be connected to the manual operating module via a shielded ZK8500-8282-70x0 signal cable (3…5 m) using a 20-pin contact strip with locking. The KL9309 has a modular design and can be incorporated seamlessly on the DIN rail. K-bus communication is passed on by the terminal, but the terminal itself is not visible to the K-bus and is therefore also not recognised by the bus coupler.

The 24 V and 0 V DC feed is passed on to the subsequent terminals on two power contacts. The 24 V DC feed is made available to the manual operating modules as a power supply via four contacts (2 x 0 V, 2 x 24 V) on the 20-pin contact strip.

Technical data KL9309
Power supply 24 V DC (-15 %/+20 %)
Power contacts 24 V DC max./10 A max.
Nominal voltage 24 V DC (-15 %/+20 %)
Electrical isolation 500 V (power contact/supply voltage/fieldbus)
Shield connection
Electrical connection to DIN rail
Special features passive Bus Terminal for the connection of KL85xx manual operating modules
Weight approx. 85 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Approvals CE
Accessories  
ZK8500-8282-7030 signal cable for manual operating modules of the KL85xx series, 20 x 0.14 mm², shielded, assembled at both ends with 20-pin plug, for terminals with ribbon cable connection, length 3 m
ZK8500-8282-7040 signal cable for manual operating modules of the KL85xx series, 20 x 0.14 mm², shielded, assembled at both ends with 20-pin plug, for terminals with ribbon cable connection, length 4 m
ZK8500-8282-7050 signal cable for manual operating modules of the KL85xx series, 20 x 0.14 mm², shielded, assembled at both ends with 20-pin plug, for terminals with ribbon cable connection, length 5 m
Related products  
KL8500 Manual operation, placeholder module
KL8519 Manual operation, signal module for 16 digital inputs
KL8524 Manual operation, output module for 16 digital inputs
KL8528 Manual operation, output module for 8 digital inputs
KL8548 Manual operation, output module for 8 analog outputs 0…10 V