Special Terminals | Ordering instructions for special couplers and terminals

All Bus Couplers and Bus Terminals are supplied with a standard configuration. The settings can be found on the relevant catalog pages. In addition to this standard configuration, specific coupler and terminal types with modified software or hardware are available. These variants have an order number with additional four figures. Therefore, if you do require a configuration other than standard, quote this extended number when you place your order. The following table provides a summary of the Bus Couplers and Bus Terminals that are available with modified default settings.

Ordering information  
Bus Coupler
BK8100-0060 watchdog special setting 60 s
BK8100-1001 watchdog special setting 10 s
BK9055-1000 EtherNet/IP “Compact” Bus Coupler for up to 64 Bus Terminals (255 with K-bus extension), default IP address: 192.168.1.xxx
BK9105-1000 EtherNet/IP Bus Coupler for up to 64 Bus Terminals (255 with K-bus extension), default IP address: 192.168.1.xxx
Digital input
KL1052-0010 96 V DC positive and negative switching, not in accordance with the EN 61131-2 specifications: I high = 3 mA, I low = 0.5 mA
KL1232-0001 plus-switching, positive edge-triggered input, 10 ms pulse extension, input filter 0.2 ms
KL1232-0002 plus-switching, positive edge-triggered input, 20 ms pulse extension, input filter 0.2 ms
KL1232-0010 plus-switching, positive edge-triggered input, 100 ms pulse extension, input filter 3.0 ms
KL1232-0100 plus-switching, negative edge-triggered input, 100 ms pulse extension, input filter 0.2 ms
KL1232-0110 plus-switching, negative edge-triggered input, 100 ms pulse extension, input filter 3.0 ms
KL1232-1000 negative switching, positive edge-triggered input, 100 ms pulse extension, input filter 0.2 ms
KL1232-1001 5 V, negative switching, negative edge-triggered input, 20 ms pulse extension, input filter 0.2 ms
KL1232-1010 negative switching, positive edge-triggered input, 100 ms pulse extension, input filter 3.0 ms
KL1232-1100 negative switching, negative edge-triggered input, 100 ms pulse extension, input filter 0.2 ms
KL1232-1110 negative switching, negative edge-triggered input, 100 ms pulse extension, input filter 3.0 ms
KL1232-2000 plus switching, positive edge-triggered input, 200 ms pulse extension, input filter 0.2 ms
KL1501-0010 gate-counter with auto-reset and setting A0
KL1501-0011 up/down counter with 5 V inputs, 24 V DC outputs
KL1702-0010 230 V AC input circuit with type 2 characteristics
KL1712-0010 24 V AC/DC input circuit
Digital output
KL2502-3020 5 V output, 30 kHz limit frequency
KL2521-0010 with additional outputs (230 V AC/DC, 100 mA) instead of the additional inputs of the default variant
KL2521-0024 for 24 V signal level
KL2541-0006 stepper motor terminal 50 V DC, 5 A, 5 V encoder supply
KL2702-0002 2-channel solid state load relay up to 230 V AC/DC, 2 A, mutually locked (no UL, GL or Ex approval)
KL2702-0020 2-channel solid state load relay up to 230 V AC/DC, 1.5 A
(no UL, GL or Ex approval)
KL2722-0010 without reciprocal locking of the channels, total current 1 A
KL2732-0010 without reciprocal locking of the channels, total current 1 A
KL2751-0011 dimmer terminal without power contacts
KL2761-0011 1-channel universal dimmer terminal, 230 V AC, 600 VA (W), 50 Hz, without power contacts
KL2791-0011 1-channel AC motor speed controller, 230 V AC, 200 VA, max. 0.9 A, without power contacts
KL2791-1200 1-channel AC motor speed controller, 120 V AC, 100 VA
Analog input
KL3002-0010 Siemens S5 format
KL3002-0011 fast µP, scan time approx. 0.5 ms
KL3002-0050 Siemens S7 format
KL3012-0010 Siemens S5 format
KL3012-0011 altered range: 0…21.5 mA, maximum value corresponds to 21.5 mA instead of 20 mA
KL3012-0012 fast µP, scan time approx. 0.5 ms
KL3012-0050 Siemens S7 format
KL3022-0010 Siemens S5 format
KL3022-0011 fast µP, scan time approx. 0.5 ms
KL3022-0050 Siemens S7 format
KL3042-0010 Siemens S5 format
KL3042-0011 fast µP, scan time approx. 0.5 ms
KL3042-0012 altered range: 0…21.5 mA, maximum value corresponds to 21.5 mA instead of 20 mA
KL3042-0050 Siemens S7 format
KL3044-0050 Siemens S7 format
KL3051-0050 Siemens S7 format
KL3052-0010 Siemens S5 format
KL3052-0011 fast µP, scan time approx. 0.5 ms
KL3052-0012 changed diagnostic level (< 3.5 mA or > 21.5 mA)
KL3052-0050 Siemens S7 format
KL3054-0050 Siemens S7 format
KL3062-0010 Siemens S5 format
KL3062-0011 voltage level 0…20 V
KL3062-0012 fast µP, scan time approx. 0.5 ms
KL3062-0013 voltage level 0…30 V
KL3062-0014 voltage level 0…50 V
KL3062-0050 Siemens S7 format
KL3064-0010 Siemens S5 format
KL3064-0011 voltage level 0…20 V
KL3064-0050 Siemens S7 format
KL3102-0050 Siemens S7 format
KL3112-0050 Siemens S7 format
KL3122-0050 Siemens S7 format
KL3142-0050 Siemens S7 format
KL3172-0500 2-channel analog input terminal, 0…500 mV
KL3202-0010 PT200
KL3202-0011 PT200 in Siemens S5 format
KL3202-0012 PT500
KL3202-0013 PT500 in Siemens S5 format
KL3202-0014 PT1000
KL3202-0015 PT1000 in Siemens S5 format
KL3202-0016 Ni100
KL3202-0017 Ni100 in Siemens S5 format
KL3202-0020 resistance measurement 0…1.2 kΩ
KL3202-0021 PT100 in Siemens S5 format
KL3202-0023 Ni120
KL3202-0024 Ni120 in Siemens S5 format
KL3202-0025 Ni1000
KL3202-0026 Ni1000 in Siemens S5 format
KL3202-0027 resistance measurement 10…10 kΩ
KL3202-0028 Resolution increased to 0.01 °C; the measurement range is reduced to -40 °C to +128 °C. The absolute accuracy is 0.3 °C, differential error is 0.1 °C.
KL3202-0029 Ni1000 per Landis&Staefa characteristic curve (Siemens, 100° corresponds to 1500 Ω)
KL3204-0014 PT1000
KL3204-0021 PT100 in Siemens S5 format
KL3204-0025 Ni1000, 4-channel
KL3204-0029 Ni1000 per Landis&Staefa characteristic curve (Siemens, 100° corresponds to 1500 Ω)
KL3312-0010 type J
KL3312-0011 type J in Siemens S5 format
KL3312-0012 type L
KL3312-0013 type L in Siemens S5 format
KL3312-0014 type B
KL3312-0015 type B in Siemens S5 format
KL3312-0016 type E
KL3312-0017 type E in Siemens S5 format
KL3312-0018 type N
KL3312-0019 type N in Siemens S5 format
KL3312-0020 type R
KL3312-0021 type R in Siemens S5 format
KL3312-0022 type S
KL3312-0023 type S in Siemens S5 format
KL3312-0024 type T
KL3312-0025 type T in Siemens S5 format
KL3312-0026 type U
KL3312-0027 type U in Siemens S5 format
KL3312-0028 0…120 mV measurement
KL3312-0029 type K in Siemens S5 format
KL3312-0040 expanded temperature range for type S and L type S: -50…+1700 °C (as supplied type L: -100…+900 °C)
KL3312-0110 type J, Fahrenheit scaling
KL3312-2000 setting of reference junction temperature via process image, unit 1/256° C in a 16 bit word
KL3312-2100 external reference point temperature specification via process image is possible, the unit is 1/256 °C in 16-bit format, fast conversion time 65 ms
KL3351-0001 1-channel resistor bridge terminal (strain gauge), with faster measurement time approx. 10 ms
KL3403-0010 3-phase power measurement terminal, current path designed for 5 A transducer (1 % measuring accuracy I),
operating/storage temperature: -25…+60 °C/-40…+85 °C
KL3403-0020 3-phase power measurement terminal, current path designed for 20 mA, optimised for electronic current transformer,
operating/storage temperature: 0…+55 °C/-25…+85 °C
KL3403-0022 3-phase power measurement terminal, current path and voltage input designed for 20 mA,
operating/storage temperature: 0…+55 °C/-25…+85 °C
KL3403-0333 3-phase power measurement terminal, 500 V AC, 333 mV AC,
operating/storage temperature: 0…+55 °C/-25…+85 °C
KL3454-0050 Siemens S7 format
KM3701-0340 differential pressure up to 340 hPa
Analog output
KL4002-0010 Siemens S5 format
KL4002-0011 fast µP, scan time approx. 0.15 ms
KL4002-0050 Siemens S7 format
KL4004-0050 Siemens S7 format
KL4012-0010 Siemens S5 format
KL4012-0011 altered range: 0…21.5 mA, maximum value corresponds to 21.5 mA instead of 20 mA
KL4012-0050 Siemens S7 format
KL4021-0050 Siemens S7 format
KL4022-0010 Siemens S5 format
KL4022-0050 Siemens S7 format
KL4032-0010 Siemens S5 format
KL4032-0011 fast µP, scan time approx. 0.15 ms
KL4032-0050 Siemens S7 format
KL4034-0010 Siemens S5 format
KL4112-0010 Siemens S5 format
KL4112-0050 Siemens S7 format
KL4132-0010 Siemens S5 format
KL4132-0050 Siemens S7 format
KL4428-0050 Siemens S7 format
Position measurement
KL5111-0010 A, B, C signals: 5 V inputs
KL5111-0011 special function: latch input sets counter to zero
KL5111-0012 latches on both edges, A, B, C inputs 24 V
KL5111-0013 latches on both edges, A, B, C inputs 5 V
KL5111-0015 frequency measurement over a selectable time window; 24 V inputs
KL5111-0016 frequency measurement over a selectable time window; 5 V inputs
KL5111-0020 12 V input circuit
KL5151-0021 incremental encoder 1 x 32 bit A, B, capture input and 1 driver output 24 V, 0.5 A
KL5151-0050 incremental encoder 2 x 32 bit A, B-track
Communication
KL6001-0020 standard format 5 bytes of user data
KL6011-0020 standard format 5 bytes of user data
KL6021-0020 standard format 5 bytes of user data (rest default)
KL6021-0021 standard format 5 bytes of user data (7 bits, even, 1 stop bit, 9600 baud)
KL6021-0023 serial Bus Terminal for processing the RS485 signals from the KL6023 wireless adapter with EnOcean radio technology
KL6201-0010 preset to 22 bytes K-bus interface, supports up to 31 AS-Interface slaves (2 K-bus cycles)
KL6201-0011 preset to 38 bytes K-bus interface, supports up to 62 AS-Interface slaves (4 K-bus cycles)
KL6211-0011 preset to 38 bytes K-bus interface, supports up to 62 AS-Interface slaves (4 K-bus cycles)
KL6904-0001 TwinSAFE Logic Bus Terminal, pre-configured ex factory to 15 TwinSAFE connections
System terminals
KL9210-0020 with 2 A fuse (slow-blow) and modified label
KL9540-0010 surge filter field supply for analog terminals