AG2210
 
AG2210-+LP050S Planetary gear unit size 050

AG2210-+LP050S | Planetary gear unit size 050

Technical data AG2210-+LP050S-MF1-4 AG2210-+LP050S-MF1-5 AG2210-+LP050S-MF1-7 AG2210-+LP050S-MF1-10
Nominal output torque 6 Nm 6.5 Nm 6.5 Nm 6 Nm
Max. acceleration torque 13 Nm 14 Nm 14 Nm 13 Nm
Gear stages 1
Gear ratio 4 5 7 10
Max. input speed 8000 min-1
Idle torque 0.05 Nm
Max. torsional backlash standard/reduced ≤ 10/– arcmin
Max. radial load 650 N
Weight 0.75 kg
Typ. Flange size F F1, F2
Technical data AG2210-+LP050S-MF2-16 AG2210-+LP050S-MF2-20 AG2210-+LP050S-MF2-25 AG2210-+LP050S-MF2-35
Nominal output torque 6 Nm 6 Nm 6.5 Nm 6.5 Nm
Max. acceleration torque 13 Nm 13 Nm 14 Nm 14 Nm
Gear stages 2
Gear ratio 16 20 25 35
Max. input speed 8000 min-1
Idle torque 0.05 Nm
Max. torsional backlash standard/reduced ≤ 13/– arcmin
Max. radial load 650 N
Weight 0.95 kg
Typ. Flange size F F1, F2
Technical data AG2210-+LP050S-MF2-50 AG2210-+LP050S-MF2-70 AG2210-+LP050S-MF2-100
Nominal output torque 6.5 Nm 6.5 Nm 6 Nm
Max. acceleration torque 14 Nm 14 Nm 13 Nm
Gear stages 2
Gear ratio 50 70 100
Max. input speed 8000 min-1
Idle torque 0.05 Nm
Max. torsional backlash standard/reduced ≤ 13/– arcmin
Max. radial load 650 N
Weight 0.95 kg
Typ. Flange size F F1, F2
Order reference AG2210-+LPaaaS-MFs-i-wXy-Motorsize
aaa series/size (050, 070, 090, 120, 155)
s = 1 single-stage with i = 3/4/5/7/10
s = 2 2-stage with i = 9/12/16/20/25/30/35/40/50/70/100
i gear ratio
w = 0 smooth shaft
w = 1 shaft with groove and feather key according to DIN 6885
X identifying letter for clamping hub diameter; not available for selection, is selected automatically based on the respective motor
y = 1 standard torsional backlash
Motorsize Specifies adapter unit between motor and gearbox. Correlates to motor flange size "F" or flange compatible motor type.
Motorsize = AM801x (F1) flange code F1: AM801x; compatible with AM301x
Motorsize = AM802x (F2) flange code F2: AM802x; compatible with AM302x