AG2210
 
AG2210-+LP070S Planetary gear unit size 070

AG2210-+LP070S | Planetary gear unit size 070

Technical data AG2210-+LP070S-MF1-3 AG2210-+LP070S-MF1-4 AG2210-+LP070S-MF1-5 AG2210-+LP070S-MF1-7
Nominal output torque 29 Nm 22 Nm 21 Nm 21 Nm
Max. acceleration torque 55 Nm 42 Nm 40 Nm 40 Nm
Gear stages 1
Gear ratio 3 4 5 7
Max. input speed 6000 min-1
Idle torque 0.30 Nm 0.25 Nm 0.20 Nm 0.15 Nm
Max. torsional backlash standard/reduced ≤ 8/– arcmin
Max. radial load 1450 N
Weight 2.0 kg
Typ. Flange size F F2, F3, F4
Technical data AG2210-+LP070S-MF1-10 AG2210-+LP070S-MF2-9 AG2210-+LP070S-MF2-12 AG2210-+LP070S-MF2-16
Nominal output torque 19 Nm 29 Nm 29 Nm 22 Nm
Max. acceleration torque 37 Nm 55 Nm 55 Nm 42 Nm
Gear stages 1 2 2 2
Gear ratio 10 9 12 16
Max. input speed 6000 min-1
Idle torque 0.15 Nm
Max. torsional backlash standard/reduced ≤ 8/– arcmin ≤ 10/– arcmin ≤ 10/– arcmin ≤ 10/– arcmin
Max. radial load 1450 N
Weight 2.0 kg 2.4 kg 2.4 kg 2.4 kg
Typ. Flange size F F2, F3, F4
Technical data AG2210-+LP070S-MF2-20 AG2210-+LP070S-MF2-25 AG2210-+LP070S-MF2-30 AG2210-+LP070S-MF2-40
Nominal output torque 21 Nm 21 Nm 22 Nm 22 Nm
Max. acceleration torque 42 Nm 40 Nm 55 Nm 42 Nm
Gear stages 2
Gear ratio 20 25 30 40
Max. input speed 6000 min-1
Idle torque 0.15 Nm
Max. torsional backlash standard/reduced ≤ 10/– arcmin
Max. radial load 1450 N
Weight 2.4 kg
Typ. Flange size F F2, F3, F4
Technical data AG2210-+LP070S-MF2-50 AG2210-+LP070S-MF2-70 AG2210-+LP070S-MF2-100
Nominal output torque 21 Nm 21 Nm 19 Nm
Max. acceleration torque 40 Nm 40 Nm 37 Nm
Gear stages 2
Gear ratio 50 70 100
Max. input speed 6000 min-1
Idle torque 0.15 Nm 0.15 Nm 0.10 Nm
Max. torsional backlash standard/reduced ≤ 10/– arcmin
Max. radial load 1450 N
Weight 2.4 kg
Typ. Flange size F F2, F3, F4
Order reference AG2210-+LPaaaS-MFs-i-wXy-Motorsize
aaa series/size (050, 070, 090, 120, 155)
s = 1 single-stage with i = 3/4/5/7/10
s = 2 2-stage with i = 9/12/16/20/25/30/35/40/50/70/100
i gear ratio
w = 0 smooth shaft
w = 1 shaft with groove and feather key according to DIN 6885
X identifying letter for clamping hub diameter; not available for selection, is selected automatically based on the respective motor
y = 1 standard torsional backlash
Motorsize Specifies adapter unit between motor and gearbox. Correlates to motor flange size "F" or flange compatible motor type.
Motorsize = AM802x (F2) flange code F2: AM802x; compatible with AM302x
Motorsize = AM803x (F3) flange code F3: AM803x, AM853x; compatible with AM303x
Motorsize = AM804x (F4) flange code F4: AM804x, AM854x; compatible with AM304x, AM354x