AG2210
 
AG2210-+LP090S Planetary gear unit size 090

AG2210-+LP090S | Planetary gear unit size 090

Technical data AG2210-+LP090S-MF1-3 AG2210-+LP090S-MF1-4 AG2210-+LP090S-MF1-5 AG2210-+LP090S-MF1-7
Nominal output torque 63 Nm 58 Nm 50 Nm 50 Nm
Max. acceleration torque 125 Nm 115 Nm 100 Nm 100 Nm
Gear stages 1
Gear ratio 3 4 5 7
Max. input speed 6000 min-1
Idle torque 0.6 Nm 0.6 Nm 0.5 Nm 0.4 Nm
Max. torsional backlash standard/reduced ≤ 8/– arcmin
Max. radial load 2400 N
Weight 4.0 kg
Typ. flange size F F4, F5
Technical data AG2210-+LP090S-MF1-10 AG2210-+LP090S-MF2-9 AG2210-+LP090S-MF2-12 AG2210-+LP090S-MF2-16
Nominal output torque 45 Nm 63 Nm 63 Nm 58 Nm
Max. acceleration torque 90 Nm 125 Nm 125 Nm 115 Nm
Gear stages 1 2 2 2
Gear ratio 10 9 12 16
Max. input speed 6000 min-1
Idle torque 0.4 Nm 0.30 Nm 0.30 Nm 0.30 Nm
Max. torsional backlash standard/reduced ≤ 8/– arcmin ≤ 10/– arcmin ≤ 10/– arcmin ≤ 10/– arcmin
Max. radial load 2400 N
Weight 4.0 kg 5.0 kg 5.0 kg 5.0 kg
Typ. flange size F F4, F5
Technical data AG2210-+LP090S-MF2-20 AG2210-+LP090S-MF2-25 AG2210-+LP090S-MF2-30 AG2210-+LP090S-MF2-40
Nominal output torque 58 Nm 50 Nm 63 Nm 58 Nm
Max. acceleration torque 115 Nm 100 Nm 125 Nm 115 Nm
Gear stages 2
Gear ratio 20 25 30 40
Max. input speed 6000 min-1
Idle torque 0.30 Nm
Max. torsional backlash standard/reduced ≤ 10/– arcmin
Max. radial load 2400 N
Weight 5.0 kg
Typ. flange size F F4, F5
Technical data AG2210-+LP090S-MF2-50 AG2210-+LP090S-MF2-70 AG2210-+LP090S-MF2-100
Nominal output torque 50 Nm 50 Nm 45 Nm
Max. acceleration torque 100 Nm 100 Nm 90 Nm
Gear stages 2
Gear ratio 50 70 100
Max. input speed 6000 min-1
Idle torque 0.30 Nm
Max. torsional backlash standard/reduced ≤ 10/– arcmin
Max. radial load 2400 N
Weight 5.0 kg
Typ. flange size F F4, F5
Order reference AG2210-+LPaaaS-MFs-i-wXy-Motorsize
aaa series/size (050, 070, 090, 120, 155)
s = 1 1-stage with i = 3/4/5/7/10
s = 2 2-stage with i = 9/12/16/20/25/30/35/40/50/70/100
i gear ratio
w = 0 smooth shaft
w = 1 shaft with groove and feather key according to DIN 6885
X identifying letter for clamping hub diameter; not available for selection, is selected automatically based on the respective motor
y = 1 standard torsional backlash
Motorsize Specifies adapter unit between motor and gearbox. Correlates to motor flange size F or flange compatible motor type.
Motorsize = AM804x (F4) flange code F4: AM804x, AM854x; compatible with AM304x, AM354x
Motorsize = AM805x (F5) flange code F5: AM805x, AM855x
Motorsize = AM305x in combination with AM305x, AM355x