AG2210
 
AG2210-+LP155S Planetary gear unit size 155

AG2210-+LP155S | Planetary gear unit size 155

Technical data AG2210-+LP155S-MF1-5 AG2210-+LP155S-MF1-10 AG2210-+LP155S-MF2-25
Nominal output torque 350 Nm 200 Nm 350 Nm
Max. acceleration torque 500 Nm 400 Nm 500 Nm
Gear stages 1 1 2
Gear ratio 5 10 25
Max. input speed 3600 min-1
Idle torque 2.8 Nm 2.5 Nm 1.0 Nm
Max. torsional backlash standard/reduced ≤ 8/– arcmin ≤ 8/– arcmin ≤ 10/– arcmin
Max. radial load 7500 N
Weight 17 kg 17 kg 21 kg
Typ. Flange size F F6, F7 F6, F7 F6
Technical data AG2210-+LP155S-MF2-50 AG2210-+LP155S-MF2-100
Nominal output torque 350 Nm 200 Nm
Max. acceleration torque 500 Nm 400 Nm
Gear stages 2
Gear ratio 50 100
Max. input speed 3600 min-1
Idle torque 0.8 Nm 0.7 Nm
Max. torsional backlash standard/reduced ≤ 10/– arcmin
Max. radial load 7500 N
Weight 21 kg
Typ. Flange size F F6
Order reference AG2210-+LPaaaS-MFs-i-wXy-Motorsize
aaa series/size (050, 070, 090, 120, 155)
s = 1 single-stage with i = 3/4/5/7/10
s = 2 2-stage with i = 9/12/16/20/25/30/35/40/50/70/100
i gear ratio
w = 0 smooth shaft
w = 1 shaft with groove and feather key according to DIN 6885
X identifying letter for clamping hub diameter; not available for selection, is selected automatically based on the respective motor
y = 1 standard torsional backlash
Motorsize Specifies adapter unit between motor and gearbox. Correlates to motor flange size "F" or flange compatible motor type.
Motorsize = AM806x (F6) flange code F6: AM806x, AM856x; compatible with AM306x, AM356x
Motorsize = AM807x (F7) flange code F7: AM807x; compatible with AM307x