AM801x
 
AM8012 Servomotor 0.4 Nm (M0), F1 (40 mm)

AM8012 | Servomotor 0.4 Nm (M0), F1 (40 mm)

The AM8012 standard servomotor is suitable for drive solutions with highest demands on dynamics and performance in the 230 V AC voltage range. The standstill torque of the motor depends on the winding and is in the range of < 0.52 Nm. It is available with the OCT feedback system (absolute encoder). The standard servomotor with flange code F1 (40 mm) and motor length 2 has a shaft diameter b = 8 h7 and a free shaft end of d = 25 mm.

Data for 230 V AC AM8012-wCyz
Motor type permanent magnet-excited three-phase synchronous motor
Standstill torque 0.38 Nm
Rated torque 0.33 Nm
Cooling convection
Rated speed 8000 min-1
Rated power 0.28 kW
Peak torque 1.37 Nm
Standstill current 1.30 A
Peak current 4.55 A
Torque constant 0.292 Nm/A
Voltage constant 19.2 mV/min-1
Number of poles 6
Rotor moment of inertia 0.053 kgcm²
Weight 0.71 kg
Holding torque brake (Mbr) 0.6 Nm
Power consumption (brake) at 24 V DC (Pbr) 10 W
Rotor moment of inertia incl. brake (J) 0.071 kgcm²
Weight incl. brake (m) 0.91 kg
Connection technology itec® plug
One Cable Technology (OCT) yes
Approvals CE, UL
Order reference
AM80uv-wxyz
u flange code F
v motor length
w = 0 smooth shaft
w = 1 shaft with groove and feather key according to DIN 6885
x winding code
y = 0 2-cable standard: feedback resolver
y = 1 One Cable Technology for power and feedback: feedback transmission via motor cable, no feedback cable necessary, electronic identification plate, single-turn, absolute position within one revolution, 18 bit resolution
y = 2 One Cable Technology for power and feedback: feedback transmission via motor cable, no feedback cable necessary, electronic identification plate, multi-turn, absolute position within 4096 revolutions, 18 bit resolution
y = N without feedback (sensorless)
z = 0 without holding brake
z = 1 with holding brake
All electric quantities are RMS values.
The options cannot be installed in the field.