AM8000
 
AM801x Servomotor 0.20 – 0.52 Nm (standstill torque)

AM801x | Servomotor 0.20 – 0.52 Nm (standstill torque)

The AM8000 series is currently complemented by motors in flange size F1 (40 mm) for drive solutions with minimised space requirements. Three overall lengths covering a torque range from 0.22 to 0.55 Nm offer a low rotor moment of inertia and very high overload capacity. Based on these technical characteristics it is possible to implement highly dynamic applications in a very small mounting space.

The very compact motors feature electronic identification plates and are optionally available with backlashfree permanent magnet holding brake or feather key groove. To provide maximum motor performance in a compact size, the motors are designed with absolute encoder feedback and One Cable Technology (OCT). OCT uses a single cable for motor supply and position feedback. This means that only one connector is required at the motor, which reduces cabling costs significantly.

Typical areas of application for these motors are traversing and feed axes.

 

Features

AM801x Servomotor 0.20 – 0.52 Nm (standstill torque)

Dimensions a b d l r k (without brake) k (with brake)
AM8011-wByz 30 h7 8 h7 25 mm 46 mm 40 mm 97 mm 129 mm
AM8012-wCyz 30 h7 8 h7 25 mm 46 mm 40 mm 117 mm 149 mm
AM8013-wDyz 30 h7 8 h7 25 mm 46 mm 40 mm 137 mm 169 mm
Accessories  
AG2210-+LP050S Planetary gear unit size 050
AG2210-+LP070S Planetary gear unit size 070
AX5101 Digital Compact Servo Drives, 1-channel, 1.5 A
AX5201 Digital Compact Servo Drives, 2-channel, 2 x 1.5 A
AX5103 Digital Compact Servo Drives, 1-channel, 3 A
AX5203 Digital Compact Servo Drives, 2-channel, 2 x 3 A
ZK450x-8022-xxxx motor cable 1 mm² with iTec/yTec plug, highly flexible for drag-chain use, 12 A