AM853x
 
AM8533 Servomotor with increased moment of inertia 3.22 Nm (standstill torque)

AM8533 | Servomotor with increased moment of inertia 3.22 Nm (standstill torque)

Data for 400 V AC AM8533-wEyz AM8533-wFyz AM8533-wJyz
Standstill torque 3.20 Nm 3.22 Nm 3.22 Nm
Rated torque 2.98 Nm 2.70 Nm 2.30 Nm
Cooling convection
Rated speed 3000 min-1 6000 min-1 9000 min-1
Rated power 0.94 kW 1.70 kW 2.17 kW
Peak torque 17.19 Nm 17.71 Nm 17.22 Nm
Standstill current 2.10 A 4.10 A 6.80 A
Peak current 12.9 A 24.6 A 39.8 A
Torque constant 1.50 Nm/A 0.78 Nm/A 0.47 Nm/A
Voltage constant 106 mV/min-1 57 mV/min-1 34 mV/min-1
Number of poles 8
Rotor moment of inertia 2.44 kgcm²
Weight 3.6 kg
Connection technology itec® plug
One Cable Technology (OCT) yes
Order reference
AM85uv-wxyz
u flange code F
v motor length
w = 0 smooth shaft
w = 1 shaft with groove and feather key according to DIN 6885
w = 2 shaft with IP 65 sealing ring and smooth shaft
w = 3 shaft with IP 65 sealing ring and shaft with groove and feather key
x winding code A…Z
y = 0 2-cable standard: feedback resolver
y = 1 One Cable Technology for power and feedback: feedback transmission via motor cable, no feedback cable necessary, electronic identification plate, single-turn, absolute position within one revolution, 18 bit resolution
y = 2 One Cable Technology for power and feedback: feedback transmission via motor cable, no feedback cable necessary, electronic identification plate, multi-turn, absolute position within 4096 revolutions, 18 bit resolution
y = A One Cable Technology for power and feedback: feedback transmission via motor cable, no feedback cable necessary, electronic identification plate, single-turn, absolute position within one revolution, resolution 23 bit
y = B One Cable Technology for power and feedback: feedback transmission via motor cable, no feedback cable necessary, electronic identification plate, multi-turn, absolute position within 4096 revolutions, resolution 23 bit
y = N without feedback (sensorless)
z = 0 without holding brake
All electric quantities are RMS values.
The options cannot be installed in the field.