AM885x
 
AM8851 Stainless steel servomotor 3.1 Nm (standstill torque)

AM8851 | Stainless steel servomotor 3.1 Nm (standstill torque)

Data for 400 V AC AM8851-wDyz
Standstill torque 3.10 Nm
Rated torque 2.70 Nm
Rated speed 2500 min-1
Rated power 0.71 kW
Peak torque 17.20 Nm
Standstill current 1.80 A
Peak current 12.10 A
Torque constant 1.722 Nm/A
Voltage constant 125 mV/min-1
Number of poles 8
Rotor moment of inertia 2.315 kgcm²
Weight 7.0 kg
Holding torque brake (Mbr) 9 Nm
Power consumption (brake) at 24 V DC (Pbr) 18 W
Rotor moment of inertia incl. brake (J) 2.975 kgcm²
Weight incl. brake (m) 8.1 kg
Order reference
AM88uv-wxyz-caaa
u flange code
v motor length
w = 0 smooth shaft with sealing ring IP 69K
w = 1 shaft with groove and feather key according to DIN 6885 and sealing ring IP 69K
x winding code A…Z
y = 0 2-cable standard: feedback resolver
y = 1 One Cable Technology for power and feedback: feedback transmission via motor cable, no feedback cable necessary, electronic identification plate, single-turn, absolute position within one revolution, 18 bit resolution
y = 2 One Cable Technology for power and feedback: feedback transmission via motor cable, no feedback cable necessary, electronic identification plate, multi-turn, absolute position within 4,096 revolutions, 18 bit resolution
z = 0 without holding brake
z = 2 without holding brake, with sealing air connection
z = 1 with holding brake
z = 3 with holding brake, with sealing air connection
c = 0 motor connection via M23 speedtec® plug, cable length definable via aaa (1)
c = 2 direct connection for AX5000 up to 25 A (X13+X14), cable length definable via aaa
aaa length of the motor cable in decimetres
(1) For motor connection via an M23 speedtec® plug, a connecting cable ZK4500-80x3-xxxx must also be ordered in the required length.
All electric quantities are RMS values.
The options cannot be installed in the field.