AS10xx
 
AS1010 stepper motor 0.38 Nm (standstill torque)

AS1010 | stepper motor 0.38 Nm (standstill torque)

Data for 50 V DC AS1010-0000
Flange code N1 (NEMA17/42 mm)
Rated supply voltage 24…50 V DC
Rated current (per phase) 1.00 A
Standstill torque 0.38 Nm
Winding resistance (per phase) 4.10 Ω
Winding inductance (per phase) 9.50 mH
Rotor moment of inertia 0.056 kgcm²
Resolution 1.8°/200 full steps
Dimensions (r x length) 42 mm x 39 mm
Weight 0.31 kg
EtherCAT Terminal EL7037/EL7031
EtherCAT Box EP7041-1002
Bus Terminal KL2531
Order reference
AS1010-wxyz
w = 0 smooth shaft with 1 flat
x = 0 standard motor without second shaft
y = 0 no incremental encoder
z = 0 standard
Accessories  
KL2531 stepper motor Bus Terminal, Imax = 1.5 A, 24 V, IP 20
EL7031 stepper motor EtherCAT Terminal, 24 V DC, Imax = 1.5 A
ZK4000-6200-2xxx motor cable for AS1000, assembled at both ends, 4 x 0.5 mm², 4 million bending cycles, bending radius = 55 mm (10 x OD)
ZK4000-6700-2xxx motor cable for AS1000, assembled at both ends, (4 x 0.5 mm²), shielded, 4 million bending cycles, bending radius = 55 mm (10 x OD)
EP7041-1002 EtherCAT Box, industrial housing, Stepper motor module, 50 V DC, 1.5 A, with incremental encoder, 2 digital inputs, 1 digital output
ZK4000-5151-0xxx AS2000 encoder cable, drag-chain suitable, (5 x 0.25 mm²), shielded, for EP704x/EJ704x
ZK4000-6261-0xxx Motor cable for AS1000, assembled at both ends, (4 x 0.5 mm²), 4 million bending cycles, bending radius = (10 x OD)
ZK4701-04x1-2xxx supply cables for compact Drive Technology