AS2000
 
AS204x Stepper motor 5.0 Nm (standstill torque)

AS204x | Stepper motor 5.0 Nm (standstill torque)

Data for 50 V DC AS2041-1Hy0 AS2042-1Hy0 AS2043-1Jy0
Flange code N3 (NEMA34/86 mm)
Rated supply voltage 24…50 V DC
Rated current (per phase) 5.60 A 5.60 A 6.50 A
Standstill torque 3.3 Nm 6.4 Nm 8.0 Nm
EtherCAT Terminal EL7047/EL7041
EtherCAT plug-in module EJ7047
EtherCAT Box EP7041-3002
Bus Terminal KL2541
Order reference
AS20uv-wxyz
u flange code
v motor length
w = 1 shaft with groove and feather key according to DIN 6885 (only for AS204x)
w = 8 shaft with 1 flat
x winding code
y = 0 no encoder
y = 1 encoder 24 V DC, 1024 increments
z = 0 without holding brake
Accessories  
EL7047 stepper motor EtherCAT Terminal, with vector control, 50 V DC, Imax = 5.0 A
EL7041 stepper motor EtherCAT Terminal, Imax = 5.0 A, 50 V, IP 20
EJ7047 EtherCAT plug-in module, stepper motor module 50 V DC, 5 A, with incremental encoder, vector control
EP7041-3002 EtherCAT Box, industrial housing, Stepper Motor module 50 V DC, 5 A, 2 phases, with incremental encoder, 2 digital inputs 24 V DC, 1 digital output 24 V DC, for high speed applications
EPP7041-3002 EtherCAT P Box, industrial housing, stepper motor module 50 V DC, 5 A, 2 phases, with incremental encoder, 2 digital inputs 24 V DC, 1 digital output 24 V DC, for high speed applications
KL2541 stepper motor Bus Terminal, IMAX = 5 A, 50 V, IP 20
ZK4000-5100-2xxx encoder cable for ASxxxx, IP 67, PUR, (5 x 0.25 mm²), shielded, flex, M12, plug, straight, male, 5-pin, A-coded – open end
ZK4000-5151-0xxx encoder cable for ASxxxx, IP 67, PUR, (5 x 0.25 mm²), shielded, flex, M12, plug, straight, male, 5-pin, A-coded – M12, plug, straight, male, 5-pin, A-coded
ZK4000-6877-0xxx motor cable, IP 67, PUR, 4 x 0.75 mm², shielded,drag chain suitable, M12, plug, straight, male, 4-pin, A-coded – M12, socket, straight, female, 4-pin, T-coded
ZK4000-7700-0xxx motor cable, IP 67, PUR, 4 x 0.75 mm², shielded, drag-chain suitable, M12, plug, straight, socket, 4-pin, T-coded – open end
AX2090-+JC10-c/d jaw-type coupling for flange code N3 (AS204x), available in (drive/output) 14.0/14.0 mm, 14.0/16.0 mm
AG2250-+PLE80 Planetary gear units for AS2000: flange size N3
AG2250-+WPLE80 Angled planetary gear units for AS2000: flange size N3
Product announcement
estimated market release 2nd quarter 2018