Power supply units and and UPS modules for CX2000
 CX2100-0004
Status LCD display
Power LEDs
Power supply
E-bus/
K-bus interface
Power supply unit with E-bus/K-bus interface
Power supply units and and UPS modules for CX2000
 CX2100-0014
Passive cooling
Diagnostic and
power LEDs
Power supply
E-bus/
K-bus interface
Power supply unit with E-bus/K-bus interface
Power supply units and and UPS modules for CX2000
 CX2100-0904
Power supply unit with integrated capacitive UPS
and E-bus/K-bus interface
Power supply units and and UPS modules for CX2000
 CX2100-0914
Status LCD display
Power LEDs
Power supply
E-bus/
K-bus interface
Power supply unit with integrated Smart Battery charger
and E-bus/K-bus interface

CX2100-0xxx | Power supply units and and UPS modules for CX2000

The CX2100 power supply and UPS modules are used for supplying power to the components (CPU modules, system and extension modules) of a CX20x0 system. The power supply modules are controlled via TwinCAT. A FSTN LC display with 2 x 16 characters and a selector switch as well as an enter key allow the querying of internal status values as well as self-created display parameters or menus with and without input options.

K-bus or alternatively EtherCAT terminals can be connected on the right-hand side – the respective bus system is detected automatically and operated by the CPU. Power is supplied to the E-bus or K-bus electronics in the I/O terminals by an integrated, but internally separate power supply unit with 2 A at 5 V DC.

All power supply units from the CX2000 series are in principle passively cooled, have no fans and are intended for operation in the extended temperature range from -25…+60 °C. A choice of four different power supply units is available for the CX2000 CPUs:

Technical data CX2100-0004 CX2100-0014 CX2100-0904 CX2100-0914
Power supply 24 V DC (-15 %/+20 %)
Max. output 45 W 90 W 45 W 90 W
I/O connection E-bus or K-bus, automatic recognition
Current supply E-bus/K-bus 2 A
UPS capacitively integrated external Smart Battery
Charge 75 As dependent on battery
Type of connection spring-loaded technique (adapter terminal)
Display FSTN display 2 lines x 16 characters of text, illuminated
Diagnostics LED 1 x PWR, 1 x I/O Run, 1 x I/O Err
Max. power consumption 3.5 W
Dimensions (W x H x D) 40 mm x 100 mm x 91 mm 60 mm x 100 mm x 91 mm 118 mm x 100 mm x 91 mm 84 mm x 100 mm x 91 mm
Weight approx. 375 g approx. 550 g approx. 1025 g approx. 695 g
Operating/storage temperature -25…+60 °C/-40…+85 °C -25…+60 °C/-40…+85 °C -25…+50 °C/-25…+60 °C -25…+60 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protection class IP 20
Approvals CE, UL
Options  
CX2900-0192 Battery pack for CX2100-0914