Digital input
EPP1004-0061
 
EPP1004-0061 | 4-channel digital input 24 V DC, 3.0 ms
EPP1004-0061
Connector
assignment
I/O
connection
M8 I/O
connection sockets 
Signal status display
Labelling areas 
1 | + 24 V DC Us
3 | GND
4 | Input
1 | TX+/GNDS
2 | Rx+/GNDP
3 | Rx-/UP
4 | Tx-/US
3-wire  2-wire
EtherCAT P
signal input 
EtherCAT P
signal output 
Power supply
status display:
Box supply (US
Auxiliary voltage (UP
extended temperature range

EPP1004-0061 | 4-channel digital input 24 V DC, 3.0 ms

The EPP1004-0061 EtherCAT P Box with digital inputs acquires the binary control signals from the process level and transmits them, in an electrically isolated form, to the controller. The state of the signals is indicated by light emitting diodes. The signals are connected via M8 screw type connectors.

The EtherCAT P Box modules are characterised by their small and space-saving form factor.

Technical data EPP1004-0061
Specification EN 61131-2, type 1/3
Nominal input voltage 24 V DC (-15 %/+20 %)
“1“ signal voltage 11…30 V (EN 61131-2, type 3)
“0“ signal voltage -3…+5 V (EN 61131-2, type 3)
Input current typ. 3 mA (EN 61131-2, type 3)
Number of inputs 4
Input filter 3.0 ms
Input connections M8, screw type
Sensor supply from control voltage, max. 0.5 A total, short-circuit-proof
Protocol EtherCAT
Bus interface 2 x M8 socket, shielded, screw type, EtherCAT-P-coded
Distributed clocks
Power supply connection not necessary
Bit width in the process image 4 inputs
Current consumption from US typ. 100 mA
Operating/storage temperature -25…+60 °C/-40…+85 °C
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 65/66/67 (conforms to EN 60529)/variable
Approvals CE, UL in preparation
Accessories  
ZK700x-010x-0xxx Cables for EtherCAT P: Ultra-fast Communication and Power in One Cable
ZK2000-xxxx-xxxx Cables for M8 I/O connection sockets
Product announcement
estimated market release 4th quarter 2017