Infrastructure
EPP1111-0000
 
EPP1111-0000 | EtherCAT P Box with ID switch
EPP1111-0000
ID switch
1 | TX+/GNDS
2 | Rx+/GNDP
3 | Rx-/UP
4 | Tx-/US
EtherCAT P
signal input 
EtherCAT P
signal output 
Power supply
status display:
Box supply (US
Auxiliary voltage (UP
extended temperature range

EPP1111-0000 | EtherCAT P Box with ID switch

The EPP1111 EtherCAT P Box has three decimal ID switches for assigning an ID to a group of EtherCAT components. This group can be present in any position in the EtherCAT P network, as a result of which variable topologies and Hot Connect groups can be realised in a simple manner.

The EtherCAT P connection is established via shielded EtherCAT-P-coded M8 screw type connectors with direct display of link and activity status. The Run LED indicates the status of the EPP1111.

Technical data EPP1111-0000
Task within EtherCAT system identification of any EtherCAT group in the EtherCAT network
Number of configurable IDs 999
Data transfer medium EtherCAT cable
Distance between stations 100 m (100BASE-TX)
Protocol EtherCAT
Data transfer rates 100 Mbaud
Nominal voltage 24 V DC (-15 %/+20 %)
Distributed clocks
Configuration not required
Bus interface 2 x M8 socket, shielded, screw type, EtherCAT-P-coded
Power supply 24 V DC
Sensor supply
Weight approx. 165 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 65/66/67 (conforms to EN 60529)/variable
Approvals CE, UL in preparation
Accessories  
ZK700x-010x-0xxx Cables for EtherCAT P: Ultra-fast Communication and Power in One Cable