Digital input
EPP1816-3008
 
EPP1816-3008 | 16-channel digital input 24 V DC, 2 x 3-axis accelerometers
EPP1816-3008
Connector
assignment
I/O
connection
D-sub, 25-pin
1 | +24 V DC Us1
2 | GNDs
3-18 | Input 1-16
19-22 | +24 V DC Us1
23-25 | GNDs
1 | TX+/GNDS
2 | Rx+/GNDP
3 | Rx-/UP
4 | Tx-/US
EtherCAT P
signal input 
EtherCAT P
signal output 
Signal status display 
Power supply
status display:
Box supply (US
Auxiliary voltage (UP
extended temperature range

EPP1816-3008 | 16-channel digital input 24 V DC, 2 x 3-axis accelerometers

The EPP1816-3008 EtherCAT P Box with 16 digital inputs acquires the binary control signals from the process level and transmits them, in an electrically isolated form, to the controller. The state of the signals is indicated by light emitting diodes. The signals are connected via 25-pin D-sub socket.

The EtherCAT P Box has 2 x 3 axes accelerometer with 16 bits and a selectable resolution of ±2 g, ±4 g, ±8 g and ±16 g. The sampling frequency is 1 Hz to 5 KHz. Possible applications include the recording of vibrations and shocks/oscillations, and furthermore inclination measurements in all three axes.

Technical data EPP1816-3008
Specification EN 61131-2, type 1/3
Nominal input voltage 24 V DC (-15 %/+20 %)
“1“ signal voltage 11…30 V (EN 61131-2, type 3)
“0“ signal voltage -3…+5 V (EN 61131-2, type 3)
Input current typ. 3 mA (EN 61131-2, type 3)
Number of inputs 16
Input filter 10 µs
Input connections D-sub socket, 25-pin
Sensors ±2…16 g | 16 bits
Sensor supply from control voltage, max. 0.5 A total, short-circuit-proof
Protocol EtherCAT
Bus interface 2 x M8 socket, shielded, screw type, EtherCAT-P-coded
Distributed clocks yes
Power supply connection not necessary
Current consumption from US typ. 100 mA
Electrical isolation 500 V
Special features integrated accelerometers
Operating/storage temperature -25…+60 °C/-40…+85 °C
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 65/66/67 (conforms to EN 60529)/variable
Approvals CE, UL in preparation
Accessories  
ZK700x-010x-0xxx Cables for EtherCAT P: Ultra-fast Communication and Power in One Cable
M23, D-Sub Other field assembly connectors