Digital output
EPP2028-000x
 
EPP2028-0001 | 8-channel digital output 24 V DC, I<span class="EFF_MAX_subscript">MAX</span> = 2 A (∑ 3&nbsp;A)
EPP2028-0001
Connector
assignment
I/O
connection
M8 I/O
connection sockets 
Signal status display
Labelling areas 
1 | + 24 V DC UP
3 | GNDP
4 | Output
1 | TX+/GNDS
2 | Rx+/GNDP
3 | Rx-/UP
4 | Tx-/US
3-wire  2-wire
EtherCAT P
signal input 
EtherCAT P
signal output 
Power supply
status display:
Box supply (US
Auxiliary voltage (UP
extended temperature range
EPP2028-0002 | 8-channel digital output 24 V DC, I<span class="EFF_MAX_subscript">MAX</span> = 2 A (∑ 3&nbsp;A)
EPP2028-0002
Connector
assignment
I/O
connection
M12 I/O
connection sockets 
Signal status display
Labelling areas 
1 | + 24 V DC UP
2 | Output B
3 | GNDP
4 | Output A
5 | n.c.
1 | TX+/GNDS
2 | Rx+/GNDP
3 | Rx-/UP
4 | Tx-/US
3-wire  2-wire
EtherCAT P
signal input 
EtherCAT P
signal output 
Power supply
status display:
Box supply (US
Auxiliary voltage (UP
extended temperature range

EPP2028-000x | 8-channel digital output 24 V DC, IMAX = 2 A (∑ 3 A)

The EPP2028 EtherCAT P Box with digital outputs connects binary control signals from the controller on to the actuators at the process level. The eight outputs handle load currents of up to 2 A each, although the total current is limited to 3 A. This makes these modules particularly suitable for applications in which not all of the outputs are active at the same time, or in which not all of the actuators draw 2 A signal current.

The signal state is indicated by means of light emitting diodes. The signals are optionally connected via M8 (EPP2028-0001) or M12 (EPP2028-0002) screw type connectors. The outputs are short-circuit-proof and protected against inverse connection.

Technical data EPP2028-0001 EPP2028-0002
Number of outputs 8
Output connections M8, screw type M12, screw type
Protocol EtherCAT
Bus interface 2 x M8 socket, shielded, screw type, EtherCAT-P-coded
Load type ohmic, inductive, lamp load
Nominal output voltage 24 V DC (-15 %/+20 %)
Max. output current 2 A per channel, individually short-circuit-proof, total current max. 3 A
Short circuit current max. 7 A
Distributed clocks
Current consumption from US typ. 100 mA
Auxiliary power current typ. 20 mA + load
Power supply connection not necessary
Bit width in the process image 8 outputs
Electrical isolation 500 V
Weight approx. 165 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 65/66/67 (conforms to EN 60529)/variable
Approvals CE, UL in preparation
Accessories  
ZK700x-010x-0xxx Cables for EtherCAT P: Ultra-fast Communication and Power in One Cable
ZK2000-xxxx-xxxx Cables for M8 I/O connection sockets
ZK2000-6xxx-xxxx Cables for M12 I/O connection sockets