Digital combi
EPP2316-0003
 
EPP2316-0003 | 8 x digital input + 8 x digital output 24&nbsp;V&nbsp;DC, I<span class="EFF_MAX_subscript">MAX</span> = 0.5 A
EPP2316-0003
Connector
assignment
I/O
connection
I/O connection
sockets (input)
Signal status display
I/O connection
sockets (output)
+24 V
Input 1
Input 2
Input 3
Input 4
Input 5
Input 6
Input 7
Input 8
0 V
+24 V
Output 1
Output 2
Output 3
Output 4
Output 5
Output 6
Output 7
Output 8
0 V
1 | TX+/GNDS
2 | Rx+/GNDP
3 | Rx-/UP
4 | Tx-/US
EtherCAT P
signal input 
EtherCAT P
signal output 
1-wire  2-wire  3-wire
+24V
1-wire  2-wire
0V
Power supply
status display:
Box supply (US)
Auxiliary voltage (UP)
extended temperature range

EPP2316-0003 | 8 x digital input + 8 x digital output 24 V DC, IMAX = 0.5 A

The EPP2316 EtherCAT P Box combines eight digital inputs and eight digital outputs in one device. A filter constant of 10 µs is available for the inputs. The outputs handle load currents of up to 0.5 A, are short-circuit-proof and protected against inverse polarity. Signal state and status are indicated by means of light emitting diodes. For the signal connection connectors with a spring-loaded system are used, optionally available with 1 or 3 pins. The module is supplied without connectors.

Technical data EPP2316-0003
Specification EN 61131-2, type 1/3
Number of channels 8 inputs + 8 outputs
Input/output connections connector with spring-loaded system
Protocol EtherCAT
Bus interface 2 x M8 socket, shielded, screw type, EtherCAT-P-coded
Input filter 10 µs
“0“ signal voltage -3…+5 V
“1“ signal voltage 11…30 V, 6 mA input current (EN 61131-2, type 3)
Sensor supply from control voltage, max. 0.5 A total, short-circuit-proof
Load type ohmic, inductive, lamp load
Rated load voltage 24 V DC (-15 %/+20 %)
Max. output current 0.5 A per channel, individually short-circuit-proof
Short circuit current typ. 1.5 A
Auxiliary power current typ. 20 mA + load
Current consumption from US typ. 120 mA
Power supply connection not necessary
Bit width in the process image 8 inputs + 8 outputs (8 inputs diagnostics)
Electrical isolation 500 V
Special features IP 20, ideal for e.g. operating desks
Weight approx. 165 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Accessories  
ZK700x-010x-0xxx Cables for EtherCAT P: Ultra-fast Communication and Power in One Cable
Accessories
ZS2001-0001 female header with spring connection as IP 20 plug-in connection level, for KM or EM modules, EP2316-0003, EPP2316-0003 and IE2403, 1 x 10-pin, without LED
ZS2001-0002 female header with spring connection as IP 20 plug-in connection level, for KM or EM modules, EP2316-0003, EPP2316-0003 and IE2403, 1 x 10-pin, with LED
ZS2001-0004 female header with spring connection as IP 20 plug-in connection level, for KM or EM modules, EP2316-0003, EPP2316-0003 and IE2403, 3 x 10-pin, with LED