Digital combi
EPP2318-000x
 
EPP2318-0001 | 4 x digital input + 4 x digital output 24 V DC, I<sub>max</sub> = 0.5 A, 10 µs
EPP2318-0001
Connector
assignment
I/O
connection
M8 I/O
connection sockets 
Signal status display
Labelling areas 
1 | + 24 V DC Us
3 | GND
4 | In-/Output
1 | TX+/GNDS
2 | Rx+/GNDP
3 | Rx-/UP
4 | Tx-/US
3-wire  2-wire
EtherCAT P
signal input 
EtherCAT P
signal output 
Outputs
Inputs
Power supply
status display:
Box supply (US
Auxiliary voltage (UP
extended temperature range
EPP2318-0002 | 4 x digital input + 4 x digital output 24 V DC, I<sub>max</sub> = 0.5 A, 10 µs
EPP2318-0002
Connector
assignment
I/O
connection
M12 I/O
connection sockets 
Signal status display
Labelling areas 
1 | + 24 V DC Us
2 | In-/Output B
3 | GND
4 | In-/Output A
5 | n.c.
1 | TX+/GNDS
2 | Rx+/GNDP
3 | Rx-/UP
4 | Tx-/US
3-wire  2-wire
EtherCAT P
signal input 
EtherCAT P
signal output 
Outputs
Inputs
Power supply
status display:
Box supply (US
Auxiliary voltage (UP
extended temperature range

EPP2318-000x | 4 x digital input + 4 x digital output 24 V DC, Imax = 0.5 A, 10 µs

The EPP2318 EtherCAT P Box combines four digital inputs and four digital outputs in one device. The outputs handle load currents of up to 0.5 A, are short-circuit-proof and protected against inverse polarity. The state of each signal is indicated by means of light emitting diodes. The signals are connected optionally via screw type M8 connectors (EPP2318-0001) or connector M12 screw type (EPP2318-0002).

Technical data EPP2318-0001 EPP2318-0002
Specification EN 61131-2, type 1/3
Number of channels 4 inputs + 4 outputs
Input/output connections M8, screw type M12, screw type
Protocol EtherCAT
Bus interface 2 x M8 socket, shielded, screw type, EtherCAT-P-coded
Input filter 10 µs
“0“ signal voltage -3…+5 V
“1“ signal voltage 11…30 V, 6 mA input current (EN 61131-2, type 3)
Sensor supply from control voltage, max. 0.5 A total, short-circuit-proof
Load type ohmic, inductive, lamp load
Rated load voltage 24 V DC (-15 %/+20 %)
Max. output current 0.5 A
Short circuit current typ. 1.5 A
Auxiliary power current typ. 20 mA per channel
Current consumption from US typ. 100 mA
Power supply connection not necessary
Bit width in the process image 4 inputs + 4 outputs
Weight approx. 165 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 65/66/67 (conforms to EN 60529)/variable
Approvals CE, UL in preparation
Accessories  
ZK700x-010x-0xxx Cables for EtherCAT P: Ultra-fast Communication and Power in One Cable
ZK2000-xxxx-xxxx Cables for M8 I/O connection sockets
ZK2000-6xxx-xxxx Cables for M12 I/O connection sockets