Digital combi
EPP2328-000x
 
EPP2328-0001 | 4 x digital input and 4 x digital output 24&nbsp;V&nbsp;DC, I<sub>max</sub>&nbsp;=&nbsp;2&nbsp;A (∑&nbsp;3&nbsp;A)
EPP2328-0001
Connector
assignment
I/O
connection
M8 I/O
connection sockets 
Signal status display
Labelling areas 
1 | + 24 V DC UP
3 | GND
4 | In-/Output
1 | TX+/GNDS
2 | Rx+/GNDP
3 | Rx-/UP
4 | Tx-/US
3-wire  2-wire
EtherCAT P
signal input 
EtherCAT P
signal output 
Outputs
Inputs
Power supply
status display:
Box supply (US
Auxiliary voltage (UP
extended temperature range
EPP2328-0002 | 4 x digital input and 4 x digital output 24&nbsp;V&nbsp;DC, I<sub>max</sub>&nbsp;=&nbsp;2&nbsp;A (∑&nbsp;3&nbsp;A)
EPP2328-0002
Connector
assignment
I/O
connection
M12 I/O
connection sockets 
Signal status display
Labelling areas 
1 | + 24 V DC UP
2 | In-/Output B
3 | GND
4 | In-/Output A
5 | n.c.
1 | TX+/GNDS
2 | Rx+/GNDP
3 | Rx-/UP
4 | Tx-/US
3-wire  2-wire
EtherCAT P
signal input 
EtherCAT P
signal output 
Outputs
Inputs
Power supply
status display:
Box supply (US
Auxiliary voltage (UP
extended temperature range

EPP2328-000x | 4 x digital input and 4 x digital output 24 V DC, Imax = 2 A (∑ 3 A)

The EPP2328 EtherCAT P Box combines four digital inputs and four digital outputs in one device. A filter constant of 3.0 ms is available for the inputs. The outputs handle load currents of up to to 2 A each, although the total current is limited to 3 A. This makes these modules particularly suitable for applications in which not all of the outputs are active at the same time, or in which not all of the actuators draw 2 A signal current.

The state of each signal is indicated by means of light emitting diodes. The signals are connected optionally via screw type M8 connectors (EPP2328-0001) or connector M12 screw type (EPP2328-0002). The sensors are powered by the box supply US.

Technical data EPP2328-0001 EPP2328-0002
Specification EN 61131-2, type 1/3
Number of channels 4 inputs + 4 outputs
Input/output connections M8, screw type M12, screw type
Protocol EtherCAT
Bus interface 2 x M8 socket, shielded, screw type, EtherCAT-P-coded
Input filter 3.0 ms
“0“ signal voltage -3…+5 V
“1“ signal voltage 11…30 V, 6 mA input current (EN 61131-2, type 3)
Sensor supply from control voltage, max. 0.5 A total, short-circuit-proof
Load type ohmic, inductive, lamp load
Rated load voltage 24 V DC (-15 %/+20 %)
Max. output current 2 A per channel, individually short-circuit-proof, total current max. 3 A
Short circuit current typ. 4 A
Auxiliary power current typ. 20 mA
Power supply connection not necessary
Bit width in the process image 4 inputs + 4 outputs
Electrical isolation 500 V
Weight approx. 165 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 65/66/67 (conforms to EN 60529)/variable
Approvals CE, UL in preparation
Accessories  
ZK700x-010x-0xxx Cables for EtherCAT P: Ultra-fast Communication and Power in One Cable
ZK2000-xxxx-xxxx Cables for M8 I/O connection sockets
ZK2000-6xxx-xxxx Cables for M12 I/O connection sockets