Digital combi
EPP2334-0061
 
EPP2334-0061 | 4-channel digital input or output, 24 V DC, M8, I<sub>max</sub> = 0.5 A
EPP2334-0061
Connector
assignment
I/O
connection
M8 I/O
connection sockets 
Signal status display
Labelling areas 
1 | + 24 V DC UP
3 | GND
4 | In-/Output
1 | TX+/GNDS
2 | Rx+/GNDP
3 | Rx-/UP
4 | Tx-/US
3-wire  2-wire
EtherCAT P
signal input 
EtherCAT P
signal output 
Power supply
status display:
Box supply (US
Auxiliary voltage (UP
extended temperature range

EPP2334-0061 | 4-channel digital input or output, 24 V DC, M8, Imax = 0.5 A

The EPP2334-0061 EtherCAT P Box has four digital channels, each of which can optionally be operated as an input or as an output. A configuration for using a channel as input or output is not necessary; the input circuit is internally connected to the output driver, so that a set output is displayed automatically in the input process image.

The outputs handle load currents of up to 0.5 A, are short-circuit-proof and protected against inverse polarity. The filter constant of the inputs is 10 µs.

The state of each signal is indicated by means of light emitting diodes. The signals are connected via M8 connectors.

The EtherCAT P Box modules are characterised by their small and space-saving form factor.

Technical data EPP2334-0061
Specification EN 61131-2, type 1/3
Number of channels 4 digital inputs or outputs
Input/output connections M8, screw type
Protocol EtherCAT
Bus interface 2 x M8 socket, shielded, screw type, EtherCAT-P-coded
Input filter 10 µs
“0“ signal voltage -3…+5 V
“1“ signal voltage 11…30 V, 6 mA input current (EN 61131-2, type 3)
Sensor supply from load supply voltage, max. 0.5 A total, short-circuit-proof
Load type ohmic, inductive, lamp load
Rated load voltage 24 V DC (-15 %/+20 %)
Max. output current 0.5 A per channel, individually short-circuit-proof
Short circuit current typ. 1.5 A
Auxiliary power current typ. 20 mA
Power supply connection not necessary
Bit width in the process image 4 inputs + 4 outputs
Operating/storage temperature -25…+60 °C/-40…+85 °C
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 65/66/67 (conforms to EN 60529)/variable
Approvals CE, UL in preparation
Accessories  
ZK700x-010x-0xxx Cables for EtherCAT P: Ultra-fast Communication and Power in One Cable
ZK2000-xxxx-xxxx Cables for M8 I/O connection sockets
Product announcement
estimated market release 4th quarter 2017