Digital output
EPP2624-0002
 
EPP2624-0002 | 4-channel relay output 25 V AC/30 V DC
EPP2624-0002
Connector
assignment
I/O
connection
M12 I/O
connection sockets 
Signal status display
Labelling areas 
1 | +24V DC UP
2 | 13
3 | GNDP
4 | 14
5 | n. c.
1 | TX+/GNDS
2 | Rx+/GNDP
3 | Rx-/UP
4 | Tx-/US
EtherCAT P
signal input 
EtherCAT P
signal output 
Power supply
status display:
Box supply (US
Auxiliary voltage (UP
extended temperature range

EPP2624-0002 | 4-channel relay output 25 V AC/30 V DC

The EPP2624 EtherCAT P Box has four relays each of which has a single contact. The relay contact is suitable for use at up to 25 V AC or 30 V DC. The EtherCAT P Box indicates its signal state by means of light emitting diodes. The EPP2624 has potential-free contacts. The power supply is looped through.

Technical data EPP2624-0002
Number of outputs 4 x make contacts
Rated load voltage 25 V AC/30 V DC
Output connections M12, screw type
Ohmic switching current 0.5 A AC/2 A DC
Minimum permitted load 10 µA at 10 mV DC
Protocol EtherCAT
Bus interface 2 x M8 socket, shielded, screw type, EtherCAT-P-coded
Load type ohmic, inductive, lamp load
Nominal output voltage 24 V DC (-15 %/+20 %)
Distributed clocks
Current consumption from US typ. 100 mA
Power supply connection not necessary
Bit width in the process image 4 outputs
Operating cycles mech. (min.) 1 x 108
Operating cycles electr. (min.) 2 x 105 (1 A/30 V DC)
Electrical isolation 500 V
Special features potential-free switching
Weight approx. 165 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 65/66/67 (conforms to EN 60529)/variable
Approvals CE, UL in preparation
Accessories  
ZK700x-010x-0xxx Cables for EtherCAT P: Ultra-fast Communication and Power in One Cable
ZK2000-6xxx-xxxx Cables for M12 I/O connection sockets