Digital output
EPP2809-002x
 
EPP2809-0021 | 16-channel digital output 24 V DC, I<span class="EFF_MAX_subscript">MAX</span> = 0.5 A (∑ 3&nbsp;A)
EPP2809-0021
Connector
assignment
I/O
connection
M8 I/O
connection sockets 
Signal status display
Labelling areas 
1 | + 24 V DC UP
3 | GNDP
4 | Output
1 | TX+/GNDS
2 | Rx+/GNDP
3 | Rx-/UP
4 | Tx-/US
3-wire  2-wire
EtherCAT P
signal input 
EtherCAT P
signal output 
Power supply
status display:
Box supply (US
Auxiliary voltage (UP
extended temperature range
EPP2809-0022 | 16-channel digital output 24 V DC, I<span class="EFF_MAX_subscript">MAX</span> = 0.5 A (∑ 3&nbsp;A)
EPP2809-0022
Connector
assignment
I/O
connection
M12 I/O
connection sockets 
Signal status display
Labelling areas 
1 | + 24 V DC UP
2 | Output B
3 | GNDP
4 | Output A
5 | n.c.
1 | TX+/GNDS
2 | Rx+/GNDP
3 | Rx-/UP
4 | Tx-/US
3-wire  2-wire
EtherCAT P
signal input 
EtherCAT P
signal output 
Power supply
status display:
Box supply (US
Auxiliary voltage (UP
extended temperature range

EPP2809-002x | 16-channel digital output 24 V DC, IMAX = 0.5 A (∑ 3 A)

The EPP2809 EtherCAT P Box with digital outputs connects the binary control signals from the controller on to the actuators at the process level. The 16 outputs handle load currents of up to 0.5 A each, although the total current is limited to 3 A. This makes these modules particularly suitable for applications in which not all of the outputs are active at the same time, or in which not all of the actuators draw 0.5 A current.

The signal state is indicated by means of light emitting diodes. The signals are optionally connected via M8 (EPP2809-0021) or M12 (EPP2809-0022) screw type connectors. All outputs are short-circuit-proof and protected against inverse connection.

Technical data EPP2809-0021 EPP2809-0022
Number of outputs 16
Output connections M8, screw type M12, screw type
Protocol EtherCAT
Bus interface 2 x M8 socket, shielded, screw type, EtherCAT-P-coded
Load type ohmic, inductive, lamp load
Nominal output voltage 24 V DC (-15 %/+20 %)
Max. output current 0.5 A per channel, individually short-circuit-proof, total current max. 3 A
Short circuit current max. 1.5 A
Distributed clocks
Current consumption from US typ. 100 mA
Auxiliary power current typ. 20 mA + load
Power supply connection not necessary
Bit width in the process image 16 outputs
Electrical isolation 500 V
Weight approx. 250 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 65/66/67 (conforms to EN 60529)/variable
Approvals CE, UL in preparation
Accessories  
ZK700x-010x-0xxx Cables for EtherCAT P: Ultra-fast Communication and Power in One Cable
ZK2000-xxxx-xxxx Cables for M8 I/O connection sockets
ZK2000-6xxx-xxxx Cables for M12 I/O connection sockets