Digital output
EPP2817-0008
 
EPP2817-0008 | 24-channel digital output 24 V DC, I<sub>max</sub> = 0.5 A
EPP2817-0008
Connector
assignment
I/O
connection
D-sub, 25-pin
1-12 | Output
13| GNDP
14-25 | Output
1 | TX+/GNDS
2 | Rx+/GNDP
3 | Rx-/UP
4 | Tx-/US
EtherCAT P
signal input 
EtherCAT P
signal output 
Signal status display 
Power supply
status display:
Box supply (US
Auxiliary voltage (UP
extended temperature range

EPP2817-0008 | 24-channel digital output 24 V DC, Imax = 0.5 A

The EPP2817-0008 EtherCAT P Box with digital outputs connects the binary control signals from the controller on to the actuators at the process level. The 24 outputs handle load currents of up to 0.5 A each. All outputs are short-circuit-proof, protected against inverse connection and can be diagnosed. An output short-circuit is recognised and passed on to the controller.

The signal connection is realised by a 25-pin D-sub socket. Undervoltage detection (supply voltage < 18 V DC) is integrated and is signalled to the controller.

Technical data EPP2817-0008
Number of outputs 24
Output connections D-sub socket, 25-pin
Protocol EtherCAT
Bus interface 2 x M8 socket, shielded, screw type, EtherCAT-P-coded
Load type ohmic, inductive, lamp load
Nominal output voltage 24 V DC (-15 %/+20 %)
Max. output current 0.5 A per channel, individually short-circuit-proof, total current max. 3 A
Short circuit current max. 1.0 A
Distributed clocks yes
Current consumption from US typ. 100 mA
Auxiliary power current typ. 20 mA + load
Power supply connection not necessary
Bit width in the process image 24 outputs, 24 inputs (diagnostics)
Electrical isolation 500 V
Special features undervoltage detection for US and UP < 18 V
Weight approx. 165 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 65/66/67 (conforms to EN 60529)/variable
Approvals CE, UL in preparation
Accessories  
ZK700x-010x-0xxx Cables for EtherCAT P: Ultra-fast Communication and Power in One Cable
ZS2002-0111 D-sub plug, 25-pin, solder contacts, IP 67