Infrastructure
EPP9001-0060
 
EPP9001-0060 | EtherCAT P/EtherCAT connector with power transmission
EPP9001-0060
Connector
assignment
I/O
connection
1 | Tx+/GNDS
2 | Rx+/GNDP
3 | Rx-/UP
4 | Tx-/US
1 | Tx+
2 | Rx+
3 | Rx-
4 | Tx-
EtherCAT P
signal input 
EtherCAT
signal output 
Power supply
status display:
Box supply (US
Auxiliary voltage (UP
extended temperature range

EPP9001-0060 | EtherCAT P/EtherCAT connector with power transmission

The EPP9001-0060 EtherCAT P Box converts the incoming EtherCAT P signal (red M8 socket, EtherCAT-P-coded) into an EtherCAT signal (green M8 socket). In addition, the voltage output from the US and UP voltages can be found on the EtherCAT P Box (black M8 socket). The EPP9001-0060 is an active EtherCAT device, i.e. it appears in the EtherCAT process image of the EtherCAT master, e.g. TwinCAT.

The EtherCAT P Box modules are characterised by their small and space-saving form factor.

Technical data EPP9001-0060
Task within EtherCAT system converter from EtherCAT P to EtherCAT + power
Number of channels IN: 1 x EtherCAT P, OUT: 1 x EtherCAT
Nominal voltage 24 V DC (-15 %/+20 %)
Total current feed-in max. 3 A per US and UP
Current consumption from US typ. 100 mA
Power supply connection downstream connection: 1 x M8 female socket, 4-pin
Bus interface 1 x M8 socket, shielded, screw type, EtherCAT-P-coded, 1 x M8 socket, shielded, screw type
Protocol EtherCAT P/EtherCAT
Weight approx. 90 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 65/66/67 (conforms to EN 60529)/variable
Approvals CE, UL in preparation
Accessories  
ZK700x-010x-0xxx Cables for EtherCAT P: Ultra-fast Communication and Power in One Cable
ZK1090-3xxx-xxxx Cables for EtherCAT signal in- and -output
ZK2020-3xxx-xxxx Cables for M8 power supply
Product announcement
estimated market release 4th quarter 2017