EPP9022-0060 | EtherCAT P Box with diagnostics
1 | Tx+/GNDS
2 | Rx+/GNDP
3 | Rx-/UP
4 | Tx-/US
EtherCAT P
signal input 
EtherCAT P
signal output 
Power supply
status display:
Box supply (US
Auxiliary voltage (UP
extended temperature range

EPP9022-0060 | EtherCAT P Box with diagnostics

The EPP9022-0060 EtherCAT P Box can be used for diagnosing and measuring the voltages US and UP and currents IS and IP, both temporarily during commissioning and permanently during operation. Even without an EtherCAT master, the voltage range is displayed on the box by LEDs (green, yellow and red). In a running EtherCAT network, the values of US, UP, IS and IP can also be read out as process data in the master. The voltage levels for the LED displays can be adjusted by CoE.

In addition the EtherCAT P Box is equipped with an M8 power socket to which an external multimeter can be connected for measuring the voltages.

The EtherCAT P Box modules are characterised by their small and space-saving form factor.

Technical data EPP9022-0060
Task within EtherCAT system diagnostics of the US/UP voltages and IS/IP currents
Number of channels IN: 1 x EtherCAT P, OUT: 1 x EtherCAT P
Nominal voltage 24 V DC (-15 %/+20 %)
Total current feed-in max. 3 A per US and UP
Current consumption from US typ. 100 mA
Current rating per port max. 3 A per US and UP
Power supply connection not necessary
Bus interface M8 socket, shielded, screw type, EtherCAT-P-coded
Protocol EtherCAT P
Special features diagnostic LED for US, diagnostic LED for UP
Weight approx. 90 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 65/66/67 (conforms to EN 60529)/variable
Approvals CE, UL in preparation
ZK700x-010x-0xxx Cables for EtherCAT P: Ultra-fast Communication and Power in One Cable
Product announcement
estimated market release 4th quarter 2018