Factory calibration certificates for analog EtherCAT Terminals

Factory calibration certificates for analog EtherCAT Terminals

If Beckhoff EtherCAT Terminals are part of a measuring chain and are therefore subject to particular requirements for the reproduction/traceability of measurement results, a calibration certificate for the terminal is issued to the user for quality assurance purposes. As proof of the exact measurement error of the terminal, the certificate permits a more accurate definition of the entire measuring chain and reduces the measurement uncertainty. In the context of the error estimation of a series of measurements, a statement can be made with greater certainty about the accuracy of the measured value.

The standard deviation to the average value is reduced. The calibration certificate is assigned to an individual terminal and can be downloaded on the basis of the unique serial number. It documents the actual, momentary measurement error of the terminal at the time of production and contains important data on the environmental conditions and the testing device employed, the so-called normal.

The following analog EtherCAT measuring terminals are already available with Beckhoff factory calibration certificate. Further terminals are available on request.

Ordering information  
EL3201-0020 high-precision: measuring error < ±0.1 °C at 40 °C ambient temperature, 4-wire connection, PT100 sensors and 50 Hz filter, resolution 0.01 °C, with calibration certificate
EL3202-0020 2-channel analog input terminal, PT100 (RTD), 16 bit, high-precision, with calibration certificate
EL3314-0020 4-channel thermocouple input terminal, high-precision, with open-circuit recognition, with calibration certificate
EL3356-0020 1-channel precise load cell analysis (resistor bridge), 24 bit, with calibration certificate
EL3602-0020 2-channel analog input terminal ±10 V, ±5 V, ±2.5 V, ±1.25 V, differential input, 24 bits, with calibration certificate
EL3612-0020 2-channel analog input terminal 0…20 mA, differential input, 24 bit, with calibration certificate
EL3621-0020 1-channel analog input terminal 4…20 mA, differential input, 24 bit, with calibration certificate
EL3632-0020 2-channel analog input terminal for Condition Monitoring (IEPE), with calibration certificate
EL3681-0020 digital multimeter terminal, with calibration certificate
EL3692-0020 2-channel resistance measurement terminal 10 mΩ…10 MΩ, high-precision, with calibration certificate
EL3751-0020 1-channel analog input, high-precision, parameterisable, 24 bit, 10 kSps, differential, oversampling, with calibration certificate
EL4114-0020 4-channel analog output terminal 0…20 mA, 16 bit, with calibration certificate
EL4134-0020 4-channel analog output -10…+10 V, 16 bit, with calibration certificate

* Availability check product pages

Download factory calibration certificates