2-channel pulse width output 24 V DC EJ2502

EJ2502 | 2-channel pulse width output 24 V DC

The EJ2502 output modulates the pulse width of a binary signal and outputs it electrically isolated from the E-bus. The mark/space ratio is prescribed by a 16 bit value from the automation unit. The output stage is protected against overload and short-circuit. The EJ2502 has two channels that indicate their signal state via LEDs.

Technical data EJ2502
Number of outputs 2
Rated load voltage 24 V DC (-15 %/+20 %)
Load type ohmic, inductive, lamp load
Distributed clocks
Max. output current 0.5 A (short-circuit proof) per channel
Short circuit current typ. < 1.5 A
Base frequency 1…20 kHz, 250 Hz default
Duty factor 0…100 %
Resolution 9…15 bit
Reverse voltage protection yes
Switching times TON: > 750 ns, TOFF: > 500 ns
Power supply via the E-bus
Current consumption E-bus typ. 110 mA
Electrical isolation 500 V (E-bus/field potential)
Auxiliary power current typ. 10 mA + load
Bit width in the process image 2 x 16 bit output
Special features separate frequency can be set for each channel
Dimensions (W x H x D) approx. 12 mm x 66 mm x 55 mm
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protection class IP 20
Approvals CE, UL