1-channel pulse train output 24 V DC EJ2521-0224

EJ2521-0224 | 1-channel pulse train output 24 V DC

The EJ2521-0224 single-channel pulse-train output module outputs a digital frequency signal via two 24 V tracks (A/B). The signal can be used to control motor drivers or other signal receivers, which are controlled by single cycles. The pulse sequence and the pulse frequency or number of pulses are specified directly via the process data. The module has a 24 V latch input for connecting a limit switch for example and two 24 V switch outputs (capture/compare), which can be switched depending on the counter value in the module. The LEDs show the active outputs and the input.

Technical data EJ2521-0224
Number of outputs 1 channel (2 outputs A, B)
Rated load voltage 24 V DC (-15 %/+20 %)
Load type 24 V DC inputs
Distributed clocks yes
Signal voltage 24 V DC
Max. output current RS422 specification, 0.5 A
Base frequency 0…500 kHz, 50 kHz default
Duty factor 0…100 %
Resolution max. 15 bit (16 bit + sign)
Reverse voltage protection yes
Power supply via the E-bus
Current consumption E-bus typ. 280 mA (load-dependent)
Electrical isolation 500 V (E-bus/field potential)
Special features different modes, ramp function, travel distance control
Dimensions (W x H x D) approx. 12 mm x 66 mm x 55 mm
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protection class IP 20
Approvals CE