2-channel serial interface RS232, RS485 or RS422 EJ6002

EJ6002 | 2-channel serial interface RS232, RS485 or RS422

The EJ6002 serial interface enables the connection of devices with two RS232, RS485 or RS422 interfaces. Apart from the convenient selection of the communication standard (RS232, RS485 or RS422) using the TwinCAT software, various operation modes can be set for the termination of connection cables. The devices connected to the EJ6002 EtherCAT plug-in module communicate with the automation device via the coupler. The active communication channel operates independently of the higher-level EtherCAT system in full duplex mode with 300 baud up to 256 kbaud. The serial interfaces guarantee high immunity to interference through electrically isolated signals. In conjunction with the TwinCAT Virtual Serial COM Driver, the EJ6002 can be used as a normal Windows COM interface.

Technical data EJ6002
Technology serial interface
Interfaces individual selectable RS232, RS485 or RS422
Data transfer channels 2
Data transfer rates 300…256,000 baud (individual free configurable)
Providing external supply 2 x 5 V/100 mA, out of E-bus supply, galvanic isolated, short-circuit-proof
Power supply 24 V DC (-15 %/+20 %)
Data buffer 864 bytes receive buffer, 128 bytes transmit buffer
Current consumption E-bus 190 mA
Electrical isolation 500 V (E-bus/field potential)
Dimensions (W x H x D) 12 mm x 66 mm x 55 mm
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/see documentation
Approvals CE
Product announcement
estimated market release 1st quarter 2018