Technical data – EtherCAT plug-in modules EJxxxx
44 mm
12 mm
24 mm
55 mm
66 mm

EJxxxx | Technical data – EtherCAT plug-in modules

Technical data EJ1100 coupler 12 mm EJ module 24 mm EJ module
Design form EtherCAT I/O plug-in module
Material polycarbonate
Installation on signal distribution board
Mechanical coding EJ plug-in module: signal-specific coding pins on the housing,
signal distribution board: holes in the printed circuit board
Locking latching lug in circuit board cut-out
Connection method field wiring: application-specific wiring level on the signal distribution board,
EJ plug-in module: 2 x 20-pin socket strip
EtherCAT connection direct via EJ1100 coupler via EJ1100 coupler
Electrical isolation 500 V (E-bus/field potential)
Current supply E-bus 2200 mA
Bus interface 2 x RJ45
Dimensions (W x H x D) 44 mm x 66 mm x 55 mm 12 mm x 66 mm x 55 mm 24 mm x 66 mm x 55 mm
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 5…95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4 (with corresponding signal distribution board)
Protection class EJ module: IP 20,
EJ system: dependent on signal distribution board and housing