EtherCAT P coupler EK1300
Power LEDs
E-bus
Output for US
Input for
power contacts
Output for UP
Power contacts
Signal input EtherCAT P
Signal output EtherCAT P

EK1300 | EtherCAT P coupler

The EK1300 coupler integrates EtherCAT Terminals (ELxxxx) in the EtherCAT P network. The upper EtherCAT P interface is used to connect the coupler to the network, the lower EtherCAT-P-coded M8 socket is used for optional continuation of the EtherCAT P topology. Since EtherCAT P integrates the power supply and the communication on a single line, an additional power supply for the coupler via the terminal points is no longer required. Depending on the application, the system and sensor supply US or the peripheral voltage for actuators UP can be bridged to the power contacts. In addition to the Run LED and the link and activity status, status LEDs indicate the state of the US and UP voltages, as well as overload and short-circuit events.

Technical data EK1300
Task within EtherCAT system coupling of EtherCAT Terminals (ELxxxx) to 100BASE-TX EtherCAT P networks
Data transfer medium EtherCAT P cable, shielded, to 100BASE-TX EtherCAT P networks
Bus interface 2 x M8 socket, shielded, screw type, EtherCAT-P-coded
Power supply from EtherCAT P (24 V DC for US and UP)
Total current from EtherCAT P, max. 3 A per US and UP
Current consumption from US 40 mA + (∑ E-bus current/4)
Current consumption from UP typ. 4 mA
Current supply E-bus 2000 mA
Current rating per port max. 3 A per US and UP
Electrical isolation 500 V (power contact/supply voltage/Ethernet)
Operating/storage temperature 0…+55 °C/-25…+85 °C
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Approvals CE
Accessories  
ZK700x-010x-0xxx Cables for EtherCAT P: Ultra-fast Communication and Power in One Cable
Cordsets cordsets and connectors
System  
EtherCAT For further EtherCAT products please see the system overview