1-port EtherCAT P extension with feed-in EK1310
Signal output EtherCAT P
Input for US
Input for UP
Input for UP

EK1310 | 1-port EtherCAT P extension with feed-in

The EK1310 EtherCAT P feed-in unit enables conversion from EtherCAT to EtherCAT P or extension of an EtherCAT P network. Terminal points are used to supply the US (system and sensor supply) and the UP (peripheral voltage for actuators) for the EtherCAT P circuit. In addition to the Run LED and the link and activity status, status LEDs indicate the state of the US and UP voltages, as well as overload and short-circuit events.

Technical data EK1310
Task within EtherCAT system conversion of the E-bus signals to 100BASE-TX Ethernet for feed-in in the EtherCAT P network
Data transfer medium EtherCAT P cable, shielded, to 100BASE-TX
Bus interface 1 x M8 socket, shielded, screw type, EtherCAT-P-coded
Power supply external feed-in: 24 V DC for US and UP
Total current max. 3 A per US and UP
Current consumption from US typ. 3 mA
Current consumption from UP typ.3 mA
Current rating per port max. 3 A per US and UP
Current consumption E-bus typ. 110 mA
Electrical isolation 500 V (supply voltage Us/supply voltage Up/EtherCAT)
Operating/storage temperature 0…+55 °C/-25…+85 °C
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Approvals CE
Accessories  
ZK700x-010x-0xxx Cables for EtherCAT P: Ultra-fast Communication and Power in One Cable
Cordsets cordsets and connectors
System  
EtherCAT For further EtherCAT products please see the system overview