SERCOS III Bus Coupler EK9700
Power LEDs
E-bus
Coupler
supply
Input for
power contacts
Power contacts
Front flap
Link/Act
SERCOS III
Link/Act
SERCOS III
Address selector

EK9700 | SERCOS III Bus Coupler

SERCOSThe EK9700 Bus Coupler connects SERCOS III networks to the EtherCAT Terminals (ELxxxx) as well as the EtherCAT Box modules (EPxxxx) and converts the telegrams from SERCOS III to the E-bus signal representation. One station consists of an EK9700 and any number of EtherCAT Terminals. The coupler is connected to the network via RJ45. In EtherCAT, the SERCOS III coupler has at its disposal a lower-level, powerful and ultra-fast I/O system with a large selection of terminals. The coupler supports the SERCOS III profile and fits seamlessly into SERCOS III networks.

Technical data EK9700
Task within EtherCAT system coupling of standard digital and analog EtherCAT Terminals and EtherCAT Box modules to SERCOS III networks
Number of EtherCAT Terminals depending on the process data size
Type/number of peripheral signals depending on the process data size
Protocol SERCOS III I/O profile
Configuration not required
Bus interface 2 x RJ45 (switched)
Power supply 24 V DC (-15 %/+20 %)
Input current typ. 120 mA + (total E-bus current)/4
Current consumption E-bus up to 2 A
Power contacts 24 V DC max./10 A max.
Electrical isolation 500 V (power contact/supply voltage/Ethernet)
Dimensions (W x H x D) 64 mm x 100 mm x 73 mm
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Approvals CE, UL, Ex
Accessories  
Cordsets cordsets and connectors
FC7501 | FC7502 SERCOS PCI fieldbus cards
System  
SERCOS For further SERCOS products please see the system overview
Product announcement
estimated market release on request