8-channel digital input + 8-channel digital output with multi-timestamping EL1259
Signal LEDs
1…8
Signal LEDs
9…16
Power contact
+24 V
Power contact 0 V
Input 1 
Input 2 
Input 3 
Input 4 
Input 5 
Input 6 
Input 7 
Input 8 
Output 1
Output 2
Output 3
Output 4
Output 5
Output 6
Output 7
Output 8
Top view 
Contact assembly 
XFC – eXtreme Fast Control
extended shock and vibration range

EL1259 | 8-channel digital input + 8-channel digital output with multi-timestamping

The 16-channel EL1259 digital EtherCAT Terminal combines the function of the EL1258 – eight multi-timestamping inputs – with those of the EL2258 – eight multi-timestamping outputs. The high channel density in conjunction with timestamping of the signals enables fast, efficient processes through optimised sensor and actuator control. The EL1259 is also synchronised with other devices through the distributed clocks system, so that events in the whole system can be measured with a uniform timebase. The combination of DC-switched inputs and outputs within one terminal can be used for local switching tasks.

Technical data EL1259
Connection technology 1-wire
Number of channels 8 inputs + 8 outputs
Nominal voltage 24 V DC (-15 %/+20 %)
“0“ signal voltage -3…+5 V (IEC 61131-2, type 1/3)
“1“ signal voltage 11…30 V (IEC 61131-2, type 1/3)
Input current typ. 3 mA (EN 61131-2, type 1/3)
Input filter typ. < 1 µs
Internal sampling/execution < 10…40 µs, corresponds to 100…25 k detectable edges/s, dependent on configuration
Distributed clock precision << 1 µs
Distributed clocks yes
Load type ohmic, inductive, lamp load
Max. output current 0.5 A (short-circuit-proof) per channel
Reverse voltage protection yes
Breaking energy < 150 mJ/channel
Switching times typ. TON: < 1 µs, typ. TOFF: < 1 µs
Current consumption power contacts typ. 30 mA + load
Current consumption E-bus typ. 130 mA
Electrical isolation 500 V (E-bus/field potential)
Configuration no address or configuration setting
Conductor types solid wire, stranded wire and ferrule
Conductor connection solid wire conductors: direct plug-in technique; stranded wire conductors and ferrules: spring actuation by screwdriver
Rated cross-section solid wire: 0.08…1.5 mm²; stranded wire: 0.25…1.5 mm²; ferrule: 0.14…0.75 mm²
Special features multi-timestamping, auto activation
Weight approx. 55 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable (see documentation)
Approvals CE, UL