4-channel digital output terminal 24 V DC, negative switching EL2084
Signal LED4
Signal LED2
Signal LED3 
Signal LED1 
Power contact
+24 V
Power contact 0 V
Output 1
Output 3
Output 2
+24 V
+24 V
Output 4
Top view 
Contact assembly 
extended shock and vibration range

EL2084 | 4-channel digital output terminal 24 V DC, negative switching

The EL2084 digital output terminal connects the binary control signals from the automation unit on to the actuators at the process level with electrical isolation. The EtherCAT Terminal has four 0 V (ground) switching outputs and generates load currents with outputs that are resistant to overload and short-circuit. It contains four channels that indicate their signal state by means of light emitting diodes.

Technical data EL2084 | EL2084
Connection technology 2-wire
Number of outputs 4
Rated load voltage 24 V DC (-15 %/+20 %)
Load type ohmic, inductive, lamp load
Distributed clocks
Max. output current 0.5 A (short-circuit-proof) per channel
Short circuit current typ. < 7 A
Reverse voltage protection yes
Breaking energy < 100 mJ/channel
Switching times TON: 50 µs, TOFF: 200 µs
Current consumption E-bus typ. 100 mA
Electrical isolation 500 V (E-bus/field potential)
Current consumption power contacts typ. 30 mA + load
Bit width in the process image 4 outputs
Configuration no address or configuration setting
Weight approx. 70 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Pluggable wiring for all ESxxxx terminals
Approvals CE, UL, Ex