4-channel digital output terminal 30 V AC/DC, 2 A, solid state EL2794
Signal LED 4
Signal LED 2
Signal LED 3 
Signal LED 1 
Power contact
+24 V
Power contact 0 V
Output 1
Output 3
Output 2
0 V
0 V
Output 4
Top view 
Contact assembly 
extended shock and vibration range

EL2794 | 4-channel digital output terminal 30 V AC/DC, 2 A, solid state

The digital EL2794 EtherCAT Terminal provides four switches that can be used like a relay contact for AC/DC voltages. The electronic switch is realised through high-performance MOSFET transistors with low switch-on resistance. The switch itself is not short-circuit-proof, but due to its high pulse current capability it can cope with current until an external fuse triggers a switch-off. Wear resistance increases the availability of the application. Resistive and light inductive loads can be switched up to a rated voltage of 30 V AC/DC, completely resistive loads also up to a rated voltage of 48 V DC. High peak voltages and electromagnetic interference pulses are prevented.

Technical data EL2794
Connection technology 2-wire
Number of outputs 4 x make contacts
Rated load voltage 0…30 V AC/DC (only ohmic load: 0…48 V DC)
Distributed clocks
Max. output current 2 A per channel
Short circuit current not short-circuit-proof, see peak current
Reverse voltage protection
Switching times TON: typ. 1.8 ms, TOFF: typ. 30 ms
Output current 2 A
Breakdown voltage 80 V
Peak current 5 A (100 ms), < 50 A (10 ms)
Isolation voltage (channel/channel) < 200 V
Current consumption E-bus typ. 140 mA
Electrical isolation 500 V (E-bus/field potential)
Switching on speed typ. 1.8 ms, max. 5 ms
Switching off speed typ. 30 ms, max. 50 ms
On-resistance typ. 0.03 Ω
Special features substitute for relay contacts, potential-free
Operating/storage temperature 0…+55 °C/-25…+85 °C
Relative humidity 95 %, no condensation
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 20/variable
Approvals CE, UL