The EL3751-0020 analog input terminal is part of the new generation of analog EtherCAT measurement terminals. The nominal measuring range of the input channel can be comprehensively parameterised, both electrically and on the software side:
The measuring ranges generally reach accuracy class 0.01 %. For further information please refer to the documentation. Through the feature “ExtendedRange” the user has the full technical measuring range available, up to 107 % of the specified nominal measuring range, depending on the measuring range. This feature can be disabled, in order to ensure compatibility with the “LegacyRange” of the EL30xx/EL31xx series.
To suppress aliasing effects, the input channel features two configurable numeric software filters up to 39th order FIR/6th order IIR. The filters can be preselected or freely described, so that a band stop or a band pass can be realised. The measurement at the differential input channel is digitised with a resolution of 24 bit and 10 ksps and is transmitted to the higher-level automation device electrically isolated and optionally with oversampling. The data rate can be internally reduced, in which case the filters have to be adjusted accordingly. Non-linear characteristic sensor curves can be corrected flexibly through an integrated sampling points table. Simple mathematical operations are also possible.
The integrated supply and the switchable auxiliary resistors enable direct connection of a resistor bridge (strain gauge) or a load cell, a fixed ohmic resistor, a PTC or a potentiometer. The signal state of the EtherCAT Terminal is indicated by light emitting diodes. Each terminal has a unique ID number.
The calibration certificate for the respective serial number can be downloaded from www.beckhoff.com/certificates. The calibration certificate covers all measurement ranges.
Technical data | EL3751-0020 |
---|---|
Number of inputs | 1 |
Power supply | via the E-bus |
Technology | differential input, 2-/3-/4-/5-/6-wire connection |
Oversampling factor | n = 1…64 |
Distributed clocks | yes |
Distributed clock precision | << 1 µs |
Internal resistance | > 500 kΩ (30 V); > 4 MΩ (others); 150 Ω (current) |
Input filter limit frequency | 3 kHz |
Resolution | 24 bit (incl. sign) |
Conversion time | 100 µs/10 ksps |
Measuring error | typ. ±0.01 % relative to the respective full scale value @ 23 °C in some measuring ranges, see documentation |
Electrical isolation | 500 V (E-bus/signal voltage) |
Current consumption power contacts | – |
Current consumption E-bus | typ. 260 mA |
Dielectric strength | max. 36 V |
Configuration | no address or configuration setting |
Special features | integr. power supply for strain gauge 0.5…5 V, parameterisable, ExtendedRange 107 %, free numeric filter, TrueRMS, integrator/differentiator, non-linear scaling, PeakHold, with calibration certificate |
Weight | approx. 65 g |
Operating/storage temperature | 0…+55 °C/-25…+85 °C |
Relative humidity | 95 %, no condensation |
Vibration/shock resistance | conforms to EN 60068-2-6/EN 60068-2-27 |
EMC immunity/emission | conforms to EN 61000-6-2/EN 61000-6-4 |
Protect. class/installation pos. | IP 20/variable |
Approvals/markings | CE, UL, ATEX |
Ex-Marking | II 3 G Ex nA IIC T4 Gc |
![]() |
![]() |
Related products | |
---|---|
EL3751 | 1-channel analog input, high-precision, parameterisable, 24 bit, 10 kSps, differential, oversampling |
ELM3702-0000 | 2-channel multi-functional input, 24 bit, 10 ksps, push-in, service plug, 6-pin |
ELM3704-0000 | 4-channel multi-functional input, 24 bit, 10 ksps, push-in, service plug, 6-pin |
ELM3704-0001 | 4-channel multi-functional input, 24 bit, 10 ksps, LEMO 1B, 8-pin |
![]() |
![]() |
Services and further information | |
---|---|
ZS9001-EL3751-0020 | recalibration service for EL3751-0020: check, compensation, recalibration |
ZS9001 | recalibration of I/O components with calibration certificate, includes check, compensation, recalibration, package price depending on terminal series |
ELxxxx-0020 | EtherCAT Terminals with calibration certificate |
![]() |
![]() |