4-channel measuring bridge analysis, full/half/quarter bridge, 24 bit, 10 ksps ELM3504-0000
XFC – eXtreme Fast Control
extended temperature range
measuring bridges

ELM3504-0000 | 4-channel measuring bridge analysis, full/half/quarter bridge, 24 bit, 10 ksps

The ELM350x EtherCAT Terminals are designed for the evaluation of measuring bridges in full-bridge, half-bridge and quarter-bridge configuration. The terminals feature internally switchable supplementary resistors. The feed is integrated. Like all other parameters, the supply voltage is adjustable in the CoE. Irrespective of the signal configuration, all ELM modules have the same technological properties. The ELM350x modules for the evaluation of measuring bridges offer a maximum sampling rate of 10,000 or 20,000 samples per second. The 6-pin plug (push-in) can be removed for maintenance purposes without releasing the individual wires.

There are variants with factory calibration certificate and a recalibration service for the ELM series in preparation.

Features ELM350x
Strain gauge quarter bridge (350 Ω + 120 Ω), half bridge (up to ±16 mV/V), full bridge (up to ±32 mV/V), internal bridge completion and supply adjustable 0…10 V (2-/3-/4-/5-/6-wire connection)
Technical data ELM3504-0000
Number of channels 4
Technology resistor bridge, strain gauge
Signal type differential
Connection technology 2-/3-/4-/5-/6-wire
Connection type push-in, service plug, 6-pin
Max. sampling rate max. 100 µs/10 ksps
Oversampling factor n = 1…100 selectable (max. 10 ksamples/s)
Internal resistance > 4 MΩ
Measuring error up to typ. ±500 ppm/0.05 % relative to the respective full scale value
Temperature coefficient up to < 10 ppm/K typ.
Functional diagnostics yes
Connection diagnostics broken wire/short-circuit
Distributed clocks yes, oversampling n = 1…100, accuracy << 1 µs
Current consumption power contacts
Current consumption E-bus typ. 400 mA
Weight approx. 350 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Thermal dissipation typ. 3 W
Special features ExtendedRange 107 %, free numeric filter, TrueRMS, integrator/differentiator, non-linear scaling, PeakHold
Approvals CE
ZS9100-0002 shield connection for ELM series, shield diameter 7…16 mm
ZS9100-0003 shielding hood with EMC gland for EtherCAT measurement modules with push-in connector (ELM3xxx-0000), to provide shielding against external interference and temperature stabilisation at the measuring points when measuring temperature; black, scope of supply: shielding hood, screws
Product announcement
estimated market release 1st quarter 2018