2-channel IEPE analysis, 24 bit, 50 ksps, BNC ELM3602-0002
XFC – eXtreme Fast Control
extended temperature range
IEPE

ELM3602-0002 | 2-channel IEPE analysis, 24 bit, 50 ksps, BNC

The ELM360x EtherCAT Terminals are designed for the evaluation of IEPE sensors (Integrated Electronics Piezo-Electric), which are mainly used for vibration diagnostics and acoustics. The constant current feed can be set to 0/2/4 mA. The input characteristics are also flexibly adjustable from DC to 10 Hz in the CoE. The ELM360x basically measures voltages AC/DC and in addition, the internal scaler function can be used if, for example, an output in acceleration [m/s²] is desired.

Irrespective of the signal configuration, all ELM modules have the same technological properties. The ELM360x modules for IEPE evaluation offer a maximum sampling rate of 20,000 or 50,000 samples per second. IEPE sensors are often connected via coaxial cables, therefore the ELM360x modules feature a BNC connector.

There are variants with factory calibration certificate and a recalibration service for the ELM series in preparation.

Features ELM360x
IEPE measurement current feed 2/4 mA, can be deactivated, acquisition of the modulated AC voltage, AC/DC coupling (parameterisable high-pass)
Technical data ELM3602-0002
Number of channels 2
Technology IEPE
Signal type single-ended
Connection technology 2-wire
Connection type BNC, shielded
Max. sampling rate max. 20 µs/50 ksps
Oversampling factor n = 1…100 selectable (max. 20 ksamples/s)
Internal resistance > 2 MΩ
Measuring error typ. ±100 ppm/±0.01 % relative to the respective full scale value (DC)
Temperature coefficient typ. < 10 ppm/K
Functional diagnostics yes
Connection diagnostics broken wire/short-circuit
Distributed clocks yes, oversampling n = 1…100, accuracy << 1 µs
Current consumption power contacts
Current consumption E-bus typ. 460 mA
Weight approx. 350 g
Operating/storage temperature -25…+60 °C/-40…+85 °C
Thermal dissipation typ. 3 W
Special features ExtendedRange 107 %, free numeric filter, TrueRMS, integrator/differentiator, non-linear scaling, PeakHold
Approvals CE
Accessories  
ZS9100-0002 shield connection for ELM series, shield diameter 7…16 mm