ELX2002 | 2-channel digital output terminal 24 V DC, 45 mA, Ex i

The ELX2002 digital output terminal enables the direct connection of intrinsically safe actuators located in hazardous areas classified Zone 0/20 or 1/21. The ELX2002 supplies an output voltage of 24 V DC and a maximum output current of 45 mA per channel, total current is 80 mA. The signal state of the EtherCAT Terminal is indicated by a light emitting diode.

Technical data	ELX2002
Technology	intrinsically safe actuators
Connection technology	2-wire
Number of outputs	2
Rated load voltage	24 V DC, Ri = 254 Ω
Load type	ohmic, inductive, capacitive
Supply voltage electronics	24 V DC (via power contacts), ELX9560 power supply
Max. output current	45 mA per channel, ∑ 80 mA
Current consumption power contacts	typ. 10 mA + load
Current consumption E-bus	typ. 45 mA
Weight	approx. 55 g
Operating/storage temperature	-25…+60 °C/-40…+85 °C
Relative humidity	95 %, no condensation
Vibration/shock resistance	conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission	conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos.	IP 20/see documentation
Approvals/markings	CE, UL, ATEX, IECEx, cFMus
Ex-Marking	ATEX:   II 3(1)G Ex ec [ia Ga] IIC T4 Gc   II (1)D [Ex ia Da] IIIC   I (M1) [Ex ia Ma] I IECEx:   Ex ec [ia Ga] IIC T4 Gc   [Ex ia Da] IIIC   [Ex ia Ma] I cFMus:   AIS Class I, II, III, Division 1, Groups A thru G   Class I, Division 2, Groups A, B, C, D   Class I, Zone 2, AEx nA [ia Ga] IIC T4 Gc   Class I, Zone 2, AEx ec [ia Ga] IIC T4 Gc   [AEx ia Da] IIIC T4

further Ex components
ELXxxxx	EtherCAT Terminals with intrinsic safe in- and output
ELXxxxx-0090	EtherCAT Terminals with intrinsic safe in- and output and TwinSAFE SC
CPXxxxx	Multi-touch Panel PCs and multi-touch Control Panels for use in hazardous areas, Zone 2/22