Coupler housing
 
EtherCAT Coupler housing

Technical data – EtherCAT Coupler housing

The EtherCAT Coupler electronics can be mounted in a variety of housings. A housing has three power contacts, which, if the application requires, automatically implement a continued connection, carrying the potential of the power circuit to the next EtherCAT Terminal. The supply voltage that is connected to the coupler spring-loaded terminals is 24 V DC. If a different voltage is required for the power contacts, the appropriate power feed terminal must be inserted after the coupler.

Mechanical Data EK1501, BK1120 EK1100, EK1101, EK1110 EK3100, EK5x00, EK9xxx
Design form compact terminal housing with signal LED
Material polycarbonate
Dimensions (W x H x D) 49 mm x 100 mm x 68 mm 44 mm x 100 mm x 68 mm 64 mm x 100 mm x 80 mm
Mounting on 35 mm C-rail, conforming to EN 60715 with lock
Side by side mounting
by means of
double slot and key connection
Marking standard terminal block marking and plain language slides
(8 mm x 47 mm)
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27/29
EMC resistance burst/ESD conforms to EN 61000-6-2/EN 61000-6-4
Connection EK1501, BK1120, EK1100, EK1101, EK1110, EK3100, EK5x00, EK9xxx
Wiring Cage Clamp® spring-loaded technique
Connection cross-section 0.08 mm² ... 2.5 mm², AWG 28-14, stranded wire, solid wire
Stripping length 8 mm ... 9 mm
Fieldbus connection depending on fieldbus
Power contacts 3 spring contacts
Current load IMAX: 10 A (125 A short circuit)
Nominal voltage 24 V DC