Digital combi
EQ2339-0022
 
EQ2339-0022 | 16-channel digital input or output 24 V DC
EQ2339-0022
Connector
assignment
I/O
connection
M12 I/O
connection socket
Signal status display
Power supply
status display:
Box supply (US)
Auxiliary voltage (UP)
1 | + 24 V DC UP
2 | In-/Output B
3 | GND
4 | In-/Output A
5 | n.c.
1 | Tx+
2 | Rx+
3 | Rx-
4 | Tx-
1 | + 24 V DC Us
2 | + 24 V DC UP
3 | GNDs
4 | GNDP
3-wire  2-wire
Power supply feed
Power supply down-
stream connection
EtherCAT
signal input
EtherCAT
signal output
extended temperature range

EQ2339-0022 | 16-channel digital input or output 24 V DC

The EQ2339 EtherCAT Box has 16 digital channels, each of which can optionally be operated as an input or as an output. A configuration for using a channel as input or output is not necessary; the input circuit is internally connected to the output driver, so that a set output is displayed automatically in the input process image.

A filter constant of 3.0 ms is available for the inputs. The outputs are short-circuit-proof and protected against inverse polarity. They handle load currents of up to 0.5 A each, although the total current is limited to 4 A. The state of each signal is indicated by means of light emitting diodes. The signals are connected optionally via M8 (EQ2339-0021) or M12 (EQ2339-0022) screw type connectors. The sensors are powered by the load voltage UP.

The modules of the EQxxxx series are made of stainless steel and feature the “Hygienic Design” completely. Therefore they are ideal for applications in the food, chemical or pharmaceutical industries, which require protection class IP 69K.

Technical data EQ2339-0022
Specification EN 61131-2, type 1/3
Number of channels 16 digital inputs or outputs
Housing width 72 mm
Input/output connections M12, screw type
Protocol EtherCAT
Bus interface 2 x M8 socket, shielded, screw type
Input filter 3.0 ms
“0“ signal voltage -3…+5 V
“1“ signal voltage 11…30 V, 6 mA input current (EN 61131-2, type 3)
Sensor supply from load supply voltage, max. 0.5 A total, short-circuit-proof
Load type ohmic, inductive, lamp load
Rated load voltage 24 V DC (-15 %/+20 %)
Max. output current 0.5 A per channel, individually short-circuit-proof, total current max. 4 A
Short circuit current typ. 1.5 A
Auxiliary power current typ. 20 mA + load
Current consumption from US (without sensor current) 130 mA
Power supply connection feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin
Bit width in the process image 16 inputs + 16 outputs
Electrical isolation 500 V
Special features V2A stainless steel, Hygienic Design
Dimensions (W x H x D) 72 mm x 160 mm x 43 mm
Operating/storage temperature -25…+60 °C/-40…+85 °C
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 69K (according to EN 60529)/variable
Approvals CE, UL
Accessories  
ZK1090-3xxx-xxxx Cables for EtherCAT signal in- and -output
ZK2000-6xxx-xxxx Cables for M12 I/O connection sockets
ZK2020-3xxx-xxxx Cables for M8 power supply
Stainless steel products  
For further information on the stainless steel control solution please see here.