Lightbus
 
IPxxxx-B200, IL230x-B200 | Fieldbus Box modules for Lightbus
Compact Box
IPxxxx-B200
Coupler Box
IL230x-B200
Connector assignment
Module or IP-Link status display
Fieldbus connection input
Fieldbus connection output
Fieldbus status display
3 types of connection
1 | 8 mm snap type connector
2 | M8 screw type connector
3 | M12 screw type connector
(Special functions:
M23 screw type connector)
Power supply feed
Power supply downstream
connection
 IP-Link interface
1 | + 24 V DC Us
2 | + 24 V DC UP
3 | GND
4 | GND

IPxxxx-, IL230x-B200 | Fieldbus Box modules for Lightbus

 

Configuration

The modules are automatically addressed by the master in the order they are connected. During start-up, the system will check the cable attenuation and compare the number of projected and actually connected slaves. Special I/O parameters can be set by means of the KS2000 software (serial connection to the configuration interface of the Fieldbus Box).

 

Diagnostics

The extensive diagnostic functions of the Beckhoff Lightbus devices allow rapid fault localisation. The error telegrams are output in special counters, so that, in case of an interruption of the fibre optic ring, the location can be determined and displayed. Additionally, each slave has various diagnostic options for reporting the current status to the master. The status of the network connection, the device status, the status of the inputs and outputs and of the power supply are displayed by LEDs.

 

Cables and connectors

The Beckhoff range of ready-assembled cables makes installation a great deal easier. Wiring errors are avoided, and commissioning is more rapidly completed. The range includes fieldbus cables, power supply cables, sensor cables and accessories. The plastic fibre optics are easy to make up. The Lightbus cable is identical to the fibre optic used for the IP-Link connection.

 

Compact Box

Compact Box modules for Lightbus are available for all relevant industrial signals. In addition to digital and analog input and output modules including thermocouple and RTD inputs, there are also incremental encoder interfaces available for displacement and angle measurement in addition to serial interfaces to solve a large number of communication tasks.

 

Coupler Box

The Lightbus Coupler Box gathers the I/O data from the Extension Box modules over the interference-free IP-Link fibre optic cable. It detects the connected modules and automatically allocates the input and output data to the process image. Both data consistency and a clear separation of input and output data are ensured. The Coupler Box has four digital inputs and four digital outputs. Other kinds of signals are available in the Extension Box.

System data Lightbus | IPxxxx-B200, IL230x-B200
Number of I/O stations 254
Number of I/O points 16,192
Data transfer medium fibre optic conductor: APF (plastic) fibre (1,000 µm)
Distance between stations 45 m
Data transfer time 0.26 ms in the case of 10 modules for 32 bit input and output each (without IP-Link)
Technical data IPxxxx-B200 IL230x-B200
Extension modules max. 120 with max. 512 byte input and 512 byte output data
Digital peripheral signals according to I/O type max. 960 inputs and 960 outputs
Analog peripheral signals according to I/O type max. 124 inputs and 124 outputs
Configuration possibility via KS2000 or the controller
Data transfer rates 2.5 Mbaud
Bus interface 2 x fibre optic socket for plug ZS1020-0010
Power supply control voltage: 24 V DC (-15 %/+20 %); load voltage: according to I/O type
Power supply connection feed: 1 x M8 male socket, 4-pin; downstream connection: 1 x M8 female socket, 4-pin
Auxiliary power current according to I/O type
Electrical isolation control voltage/fieldbus: yes, control voltage/inputs or outputs: according to I/O type
Weight approx. 250 g
Operating/storage temperature 0…+55 °C/-25…+85 °C
Vibration/shock resistance conforms to EN 60068-2-6/EN 60068-2-27
EMC immunity/emission conforms to EN 61000-6-2/EN 61000-6-4
Protect. class/installation pos. IP 65/66/67 (conforms to EN 60529)/variable
Approvals CE, UL
Accessories  
KS2000 configuration software for extended parameterisation
Cordsets cordsets and connectors
System  
Lightbus For further Lightbus products please see the system overview.
 

Compact Box

The Compact Box modules for Lightbus offer a wide range of I/O functionality. All relevant industrial signals are supported. The digital inputs and outputs can be connected either with snap type 8 mm diameter plugs, screw type M8 or M12 connectors. For analog signals the M12 version is used.

IPxxxx-B200 Compact Box for Lightbus systems Plug
Digital input
IP1000-B200 Compact Box, 8 digital inputs 24 V DC, 3.0 ms filter 8 mm
IP1001-B200 Compact Box, 8 digital inputs 24 V DC, 3.0 ms filter M8
IP1002-B200 Compact Box, 8 digital inputs 24 V DC, 3.0 ms filter M12
IP1010-B200 Compact Box, 8 digital inputs 24 V DC, 0.2 ms filter 8 mm
IP1011-B200 Compact Box, 8 digital inputs 24 V DC, 0.2 ms filter M8
IP1012-B200 Compact Box, 8 digital inputs 24 V DC, 0.2 ms filter M12
IP1502-B200 Compact Box, 2 up/down counter, 24 V DC, 100 kHz M12
Digital output
IP2000-B200 Compact Box, 8 digital outputs 24 V DC, IMAX = 0.5 A 8 mm
IP2001-B200 Compact Box, 8 digital outputs 24 V DC, IMAX = 0.5 A M8
IP2002-B200 Compact Box, 8 digital outputs 24 V DC, IMAX = 0.5 A M12
IP2020-B200 Compact Box, 8 digital outputs 24 V DC, IMAX = 2 A (∑ 4 A) 8 mm
IP2021-B200 Compact Box, 8 digital outputs 24 V DC, IMAX = 2 A (∑ 4 A) M8
IP2022-B200 Compact Box, 8 digital outputs 24 V DC, IMAX = 2 A (∑ 4 A) M12
IP2040-B200 Compact Box, 8 digital outputs 24 V DC, IMAX = 2 A (∑ 12 A) 8 mm
IP2041-B200 Compact Box, 8 digital outputs 24 V DC, IMAX = 2 A (∑ 12 A) M8
IP2042-B200 Compact Box, 8 digital outputs 24 V DC, IMAX = 2 A (∑ 12 A) M12
IP2512-B200 Compact Box, 2 digital pulse width outputs 24 V DC, IMAX = 2.5 A M12
Digital combi
IP2300-B200 Compact Box, 4 digital inputs 24 V DC, 3 ms filter, 4 digital outputs 24 V DC, IMAX = 0.5 A 8 mm
IP2301-B200 Compact Box, 4 digital inputs 24 V DC, 3 ms filter, 4 digital outputs 24 V DC, IMAX = 0.5 A M8
IP2302-B200 Compact Box, 4 digital inputs 24 V DC, 3 ms filter, 4 digital outputs 24 V DC, IMAX = 0.5 A M12
IP2310-B200 Compact Box, 4 digital inputs 24 V DC, 0.2 ms filter, 4 digital outputs 24 V DC, IMAX = 0.5 A 8 mm
IP2311-B200 Compact Box, 4 digital inputs 24 V DC, 0.2 ms filter, 4 digital outputs 24 V DC, IMAX = 0.5 A M8
IP2312-B200 Compact Box, 4 digital inputs 24 V DC, 0.2 ms filter, 4 digital outputs 24 V DC, IMAX = 0.5 A M12
IP2320-B200 Compact Box, 4 digital inputs 24 V DC, 3 ms filter, 4 digital outputs 24 V DC, IMAX = 2 A (∑ 4 A) 8 mm
IP2321-B200 Compact Box, 4 digital inputs 24 V DC, 3 ms filter, 4 digital outputs 24 V DC, IMAX = 2 A (∑ 4 A) M8
IP2322-B200 Compact Box, 4 digital inputs 24 V DC, 3 ms filter, 4 digital outputs 24 V DC, IMAX = 2 A (∑ 4 A) M12
IP2330-B200 Compact Box, 4 digital inputs 24 V DC, 0.2 ms filter, 4 digital outputs 24 V DC, IMAX = 2 A (∑ 4 A) 8 mm
IP2331-B200 Compact Box, 4 digital inputs 24 V DC, 0.2 ms filter, 4 digital outputs 24 V DC, IMAX = 2 A (∑ 4 A) M8
IP2332-B200 Compact Box, 4 digital inputs 24 V DC, 0.2 ms filter, 4 digital outputs 24 V DC, IMAX = 2 A (∑ 4 A) M12
IP2400-B200 Compact Box, 16 digital combination inputs/outputs 24 V DC, 3 ms filter, IMAX = 0.5 A 8 mm
IP2401-B200 Compact Box, 16 digital combination inputs/outputs 24 V DC, 3 ms filter, IMAX = 0.5 A M8
Analog input
IP3102-B200 Compact Box, 4 differential analog inputs ±10 V, 16 bit M12
IP3112-B200 Compact Box, 4 differential analog inputs 0/4…20 mA, 16 bit M12
IP3202-B200 Compact Box, 4 analog inputs for resistance thermometer (RTD), PT100…1000, Ni100, 16 bit M12
IP3312-B200 Compact Box, 4 analog inputs for thermocouple, types J, K, L, B, E, N, R, S, T, U, 16 bit M12
Analog output
IP4112-B200 Compact Box, 4 analog outputs 0/4…20 mA, 16 bit M12
IP4132-B200 Compact Box, 4 analog outputs ±10 V, 16 bit M12
Special functions
IP5009-B200 Compact Box, 1 SSI encoder interface M23
IP5109-B200 Compact Box, 1 incremental encoder interface with complementary inputs, 1 MHz M23
IP5209-B200 Compact Box, 1 SinCos encoder interface, 1 VSS M23
IP6002-B200 Compact Box, 1 serial interface RS232C M12
IP6012-B200 Compact Box, 1 serial interface, 0…20 mA (TTY) M12
IP6022-B200 Compact Box, 1 serial interface, RS422, RS485 M12

Coupler Box

The Coupler Box for Lightbus has four digital inputs and four digital outputs, optionally with snap type 8 mm diameter connectors, screw type M8 or M12 connectors. Up to 120 Extension Box modules can be connected via the IP-Link communication facility.

IL230x-B200 Coupler Box for Lightbus systems Plug
Digital combi
IL2300-B200 Coupler Box, 4 digital inputs 24 V, 3 ms filter, 4 digital outputs 24 V, 0.5 A 8 mm
IL2301-B200 Coupler Box, 4 digital inputs 24 V, 3 ms filter, 4 digital outputs 24 V, 0.5 A M8
IL2302-B200 Coupler Box, 4 digital inputs 24 V, 3 ms filter, 4 digital outputs 24 V, 0.5 A M12

System overview