ELMxxxx
 

Accessories for ELM Terminals

Shield connection for ELM series

For the DIN-rail-mountable metal housings of the ELM series a separate shield clamp, ZS9100-0002, is available. The shield connection consists of a mounting bracket, a clamp strap and two screws. The connection cable fed to the module must be stripped to allow ideal contacting of the shield. Possible interference is reliably dissipated by the shield connection, and moreover the cable is securely fixed in position. The ELM modules are supplied without pre-mounted shield connection. See housing series instructions for mounting details.

Ordering information Pict.
ZS9100-0002 shield connection for ELM series, shield diameter 7…16 mm
A
A
ZS9100-0002
 

Shielding hood with EMC gland for ELM3xxx-0000 (push-in connector)

The ZS9100-0003 shielding hood is an optional EMC accessory for ELM series EtherCAT Terminals. When the metal hood is pushed onto modules with appropriate push-in connector (ELM3xxx-0000) it forms a closed envelope together with the housing to shield against external interference. The four EMC cable glands ensure secure and conductive contact of incoming cables with the braided screen. The shielding hood enhances the reliability of temperature measurements (TC, RTD), because it stabilises the temperature at the terminal connection points and reduces the risk of measurement errors further still. The ZS9100-0003 is not necessary for modules with BNC or LEMO connection level, since with these connection techniques, continuous shielding is guaranteed from cable into terminal anyway.

Ordering information Pict.
ZS9100-0003 shielding hood with EMC gland for EtherCAT measurement modules with push-in connector (ELM3xxx-0000), to provide shielding against external interference and temperature stabilisation at the measuring points when measuring temperature; black, scope of supply: shielding hood, screws
A
A
ZS9100-0003