CU8801, CU8851
CU8801, CU8851 USB extension

CU8801, CU8851 | USB extension

The USB specification allows a distance of 5 m between the PC and the USB devices. A further 5 metres of cable can be added by using a USB hub. In the construction of machines and plants, larger distances must be bridged without having to insert a USB hub every 5 metres. The CU8801 USB Extender sends the 2.0 USB signal via a CAT 5 cable that can be up to 50 m long to the CU8851 USB Extended receiver, which converts the signal back to USB. Data rates of up to 480 Mbit/s can be transmitted. Both USB Extender boxes are designed for DIN rail mounting. The CU8801 transmitter is powered by the PC. The CU8851 receiver has an integrated 24 V DC power supply unit. The USB Extended 2.0 receiver is already integrated into the Control Panels from the CP29xx and CP39xx series.

CU8801, CU8851 USB extension

Technical data CU8801 | USB Extender 2.0 Tx CU8851 | USB Extender 2.0 Rx
  USB Extended 2.0 transmitter box USB Extended 2.0 receiver box
1 USB input with USB B socket to be connected to the PC in maximum 1 m distance 1 USB Extended 2.0 input with RJ 45 socket for up to 50 m CAT 5 cable
1 USB Extended 2.0 output with RJ 45 socket for up to 50 m CAT 5 cable 1 USB output with USB A socket to be connected to an USB device in maximum 5 m distance
quick error analysing with diagnostic LEDs
plastic housing for DIN rail installation
USB transfer rate up to 480 Mbit/s for USB 2.0
protection class IP 20
operating temperature 0…55 °C
dimensions (W x H x D) 34 x 98 x 77 mm (1.3" x 3.9" x 3")
power supply via USB 24 V DC power supply
Related products  
CU8800-0010 USB Extender 1.1 Tx for CP69xx and CP79xx
CU8850 USB Extender 1.0 Rx