Mini PCI
FC9051, FC9151
 
FC9051, FC9151 Mini PCI Ethernet

FC9051, FC9151 | Mini PCI Ethernet

In combination with the Ethernet Mini PCI Cards, a third Ethernet port is available in the Industrial PC with 10 Mbit/s, 100 Mbit/s or 1,000 Mbit/s. While the 100 Mbit/s Ethernet port offers optimum performance for all EtherCAT control tasks, a gigabit port is available for connecting the higher-level network.

The power of the Fieldbus Cards can be most easily seen in combination with the TwinCAT software PLC and NC. But other applications also benefit from the intelligent PCI cards that handle the fieldbus protocol efficiently on their own processors.

Technical data FC9051 FC9151
Bus system Ethernet (all IEEE 802.3-based protocols), EtherCAT
Number of Ethernet channels 1
Data transfer rates 10/100 Mbit/s, IEEE 802.3u auto-negotiation, full duplex at 10 and 100 Mbit/s, separate settings for each channel 10/100/1,000 Mbit/s, IEEE 802.3u auto-negotiation, full duplex at 10 and 100 Mbit/s, separate settings for each channel
Interface to the PC Mini PCI interface
Communication Ethernet and real-time Ethernet protocols, EtherCAT-ready
Bus device Ethernet standard
Standard drivers standard operating system drivers for Intel®-compatible NIC real-time driver
Real-time drivers TwinCAT drivers for real-time Ethernet. Drivers can be selected separately for each channel.
Dimensions 59.75 mm x 44.60 mm (type III B)
Operating temperature 0…+55 °C
Ordering information FC9051-0000 FC9151-0000
FC9x51-0000 standard configuration (can only be ordered with a Beckhoff Industrial PC with Mini PCI option)
Accessories  
TX1100 I/O driver
System  
Ethernet TCP/IP For further Ethernet TCP/IP products please see the system overview.