TF5055 | TC3 NC Flying Saw
TwinCAT NC Flying Saw implements the coupling of a slave axis to a master axis in a certain synchronous position (flying saw). PLC function blocks enable coupling and uncoupling as well as parameterisation.
- The master axis can be a real axis, a virtual axis, or some other external source of actual values.
- synchronisation of the slave axis from any motion situation (stop, forward or reverse travel) with the master in motion
- simple synchronisation with the master velocity
- precise position synchronisation with the master axis (velocity and position)
- synchronous velocity can be set via a coupling factor
- optional return prevention as additional safety function
- superimposed section compensation during the synchronous phase for dynamic position correction
| Technical data |
TF5055 |
| Required |
TC1250 |
| Target system |
Windows 7/8/10, Windows CE |
 |
|
| Ordering information |
|
| TF5055-0040 |
TC3 NC Flying Saw, platform 40 (Performance) |
| TF5055-0050 |
TC3 NC Flying Saw, platform 50 (Performance Plus) |
| TF5055-0060 |
TC3 NC Flying Saw, platform 60 (Mid Performance) |
| TF5055-0070 |
TC3 NC Flying Saw, platform 70 (High Performance) |
| TF5055-0080 |
TC3 NC Flying Saw, platform 80 (Very High Performance) |
| TF5055-0081 |
TC3 NC Flying Saw, platform 81 (Many-core 5…8 Cores) |
| TF5055-0082 |
TC3 NC Flying Saw, platform 82 (Many-core 9…16 Cores) |
| TF5055-0083 |
TC3 NC Flying Saw, platform 83 (Many-core 17…32 Cores) |
| TF5055-0084 |
TC3 NC Flying Saw, platform 84 (Many-core 33…64 Cores) |
| TF5055-0090 |
TC3 NC Flying Saw, platform 90 (Other) |
| TF5055-0091 |
TC3 NC Flying Saw, platform 91 (Other 5…8 Cores) |
| TF5055-0092 |
TC3 NC Flying Saw, platform 92 (Other 9…16 Cores) |
| TF5055-0093 |
TC3 NC Flying Saw, platform 93 (Other 17…32 Cores) |
| TF5055-0094 |
TC3 NC Flying Saw, platform 94 (Other 33…64 Cores) |
|
|